|
wow never heard of that one before :shock: thanks for the idea DD
|
Dang DD, you beat me to it.
If you have a pipe plug that won't come out, take your torch and heat up the center of the plug, let cool and it will come right out. don't heat up around it, just the plug. |
Originally Posted by DrivingMissDD
Heat the stud up with an oxy/accet torch to a glowing red, then touch a candle to it. The wax will wick into the threads. Let it cool completely to the touch and then twist it out. Magic.....
|
Double/D,
That's really cool. I did not know that.... |
Great ideas all around. The main thing is patience.
Dave |
dd's way works great and i have used another way and it may
sound dumb but it works great only if there is room on the stud, put a nut down then a washer and then tighten with another nut and work the first one off and it will titghten on the washer and work off, also spray with wd40 and if you have a can of butane spray it for a while to get it frozen and then work the nut against the washer/nut and it worked for me, only if there is room, good luck :wink: |
| All times are GMT -8. The time now is 04:11 AM. |