Head
 

You ALWAYS have a OPTION when a S/Charger is Involved!
A SMALLER TOP PULLEY!!!OR FUEL?
Personally,I LIKE BOTH!
Later
G 8)

onebadgmc i was impressed with the Tq Curve on that ENGINE of Yours ....that was one Pulling SOB wasn't it ?
thats what i love about Blowers...the freakin constant TQ curve

HotRod i ran the BB-2 on my 565ci and it was down a tad on HP but it made More TQ being a little smaller head ( valve Size)...i had alot of Port work done to them...No flow bench work.
Best to my knowledge the valve size difference on the bb-2 head VS the bb-2 extra is the 2.25 VS 2.30 on the intake valve.
as GMC said above the Blower will get the air thru them...just get your cam profile right on the lobe seperation so it can let the Boost out.

IMO you would be throwing that 1k away....and even if it did pick it up 30/40 hp...i doubt very seriously you would even notice it...Your gonna have enough problems planting what you got.... :shock:

But if you just determined to spend some Money on Heads...sell the ones you got, take the 1,000 cash and Buy you some BB-3 Oval Ports..
other then this...save the cash....Maybe take that 1k and spend it toward some R/D With Some E-85.........Pro-systems swears they got the carb deal figured out....

105 octane for 2.10 a gallon.....hey why not ?...i am going this route with a blow thru procharger

I like that idea :D 2.10 a gallon nice :lol:

Pro System and APD both have a handle on them

Sorry for the Hijack, but where would one get some E-85 @?

To my knowledge it's not in the Memphis metro area yet.


Cp

N/M

I answered my own question, did a google search, only a few cities in Tn that sell E-85, closiest is Nashville and it was only one station.

I checked my old residence of Sioux Falls, South Dakota.

16 stations in that one city alone.

They have plenty corn up there.
Cp

forced induction, yeah baby!
 

Brian,

did i read that right, a procharger? :o blow thru? :shock: :shock:

http://www.racingjunk.com/category/1...t-rockers.html

There's the heads you need (no, I don't know the seller or the condition of the heads).

Re: forced induction, yeah baby!
 

oh YEAH a very effective way to run a procharger !

360 Darts
 

Just take a MINUTE and LOOK at the PIctures?See if the WORD EXPLOTION,Or BOOM enters the Equation....................?MAYBE :shock: :shock:
Later
G 8)

Re: 360 Darts
 

ExploSion even. :D

Yeah, they look a bit rough... BUT, that being said... Aluminum heads are pretty much infinitely repairable.

If they have the Pro-Series Jesel (and not the sportsman), it's a decent deal, depending on what the rest of the head looks like. Would be worth inquiring for some more detailed photos before writing it off.