What are the guys using for AN type lines??

http://classictube.com/index.asp

I have two fittings that go in the trans that go to a #6 line and then to a trany cooler. If you allready have a trany cooler that has screw in adapters I can hook you up with fittings for it(let me know if the inlet is 1/8th,1/4,or 3/8 npt) fittings for the trany, and two #6 lines(let me know if you need straight to straight or straight to 45 or 90 etc). It is used stuff but nothing wrong with it. I'll take $25 and that includes shipping.

OK Thanks chrisr I'll let you know, I'm gonna look inside the muncie today and see whats going on with it.

go to autozone and get a tuben bender to bend the lines.It will look alot cleaner

I pulled the side cover off the muncie it all looked fine, so I unbolted the bearing cover on the input shaft and found the big nut that keeps the bearing tight on the input shaft was loose. I checked the trans over pretty good and think that was my problem. I'm gonna stick it back in this week.

If you have any more troubles, theres a friend of mine in SE Indiana thats great with those trans. has the trick parts and reasonable. We're both members of a stick league UMTR.

Ok , if I have any more trouble with it I will contact you. I would like to stay with the stick. Alot more fun on the street.