|
after hearing the second recording i would agree with mopar :wink:
|
It's definitely a clunker.
tell him to pull the valve cover |
Sounds like no oil pressure and the lifter collapsed and a torn rod bearing on that cylinder
First video sounds like a rod knock and broke piston |
OK update.....
he has oil pressure. Ok i will have him pull the valve cover. What should he look for under there. Also what would you suggest be done. |
Originally Posted by MEMRACING62
well it will be put out of its misery. if it was a horse it would have to be shot :shock:
|
run it with out the valve cover and video it.
this could get fun. |
Hey i resemble that Remark..i did run them in the past with Open valve covers when adjusting Hydraulic lifters...then i got smart and cut the center out of old valve covers...lot less messy...
Stay away from the engine D....Too many out there to choose from |
OK update..... he has oil pressure. Ok i will have him pull the valve cover. What should he look for under there. The rocker arm laying off to the side!!! lol |
Originally Posted by mopar1968
sound's like either a camshaft lobe gone and hyd lifter is trying to compensate, or bottom out of lifter. But what the Hell do i know i am a ''Mopar man'' :!: :!: :!:
''JUST MY TWO CENT'S WORTH'' |
OK tomorrow he is going to video the engine running with the valve cover off. That way you can get an inside look at it.
|
| All times are GMT -8. The time now is 12:24 AM. |