|
Re: Freshen
Originally Posted by bbchevy
Hey Hammer,
Heres a GOOD Guy rite here in our,Your Area? C-Tech Performance Wyoming,Mi. www.c-techperformance.com Arnie Snyder Give Arnie a call,He can Help!And also has in House Dyno Service Later G 8) |
I've now priced 4 "bigger" motor shops here locally
A- $2500-2800 for everything B- $1500 to do short block only C. 3500 D.3800 Needless to say I started pulling it apart tonight, how can people get this much to do a freshen up for a motor. You can buy parts decently priced Rings- $200.00 Bearings- 200 Lifters 285 Springs-275 Replacement Chain- $45.00 Gaskets- 125.00 So checking it all, hone, assembly, valve job, degree cam, and dyno cost anywhere from 1200 to 2500 |
:shock: 250 + PASSES WHAT KIND OF RODS ARE YOU RUNNING? AND AT WHAT RPMS?
|
Originally Posted by altailites
:shock: 250 + PASSES WHAT KIND OF RODS ARE YOU RUNNING? AND AT WHAT RPMS?
Eagle with L19, 250 thats a average year for me. Shift it at 7000 or 7200 depends on where I am, finish line is 7000. |
Originally Posted by hammertime
I've now priced 4 "bigger" motor shops here locally
A- $2500-2800 for everything B- $1500 to do short block only C. 3500 D.3800 Needless to say I started pulling it apart tonight, how can people get this much to do a freshen up for a motor. You can buy parts decently priced Rings- $200.00 Bearings- 200 Lifters 285 Springs-275 Replacement Chain- $45.00 Gaskets- 125.00 So checking it all, hone, assembly, valve job, degree cam, and dyno cost anywhere from 1200 to 2500 Where you get good roller lifters for $285? |
Originally Posted by Tod74
Originally Posted by hammertime
I've now priced 4 "bigger" motor shops here locally
A- $2500-2800 for everything B- $1500 to do short block only C. 3500 D.3800 Needless to say I started pulling it apart tonight, how can people get this much to do a freshen up for a motor. You can buy parts decently priced Rings- $200.00 Bearings- 200 Lifters 285 Springs-275 Replacement Chain- $45.00 Gaskets- 125.00 So checking it all, hone, assembly, valve job, degree cam, and dyno cost anywhere from 1200 to 2500 Where you get good roller lifters for $285? |
http://www.pbmperformance.com/index.php
PBM Lifters made by Morel :wink: looks like price went up 20.00 |
lifters
do you use the horizontal or vertical tie bars. thanks, mike
|
Originally Posted by hammertime
http://www.pbmperformance.com/index.php
PBM Lifters made by Morel :wink: looks like price went up 20.00 |
Re: lifters
Originally Posted by 123car
do you use the horizontal or vertical tie bars. thanks, mike
horizontals on mine. have 2 spare sets now both set have over 200 passes on them and look like new. good products |
| All times are GMT -8. The time now is 03:04 PM. |