Racingjunk Forums
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Chassis and Suspension (https://www.racingjunk.com/forums/forumdisplay.php?f=13)
-   -   Weight Distribution (https://www.racingjunk.com/forums/showthread.php?t=21828)

BillyShope 09-19-2008 03:18 AM
Re: RE
 
Originally Posted by ssym
...wait until I get a couple launches under the wheels?

Steve
Why? You know what's going to happen.

ssym 09-22-2008 01:39 AM
Re
 
Maybe I should have expressed my lack of knowledge and experience with chassis and four link....

I am not sure what will happen the first time I launch.

How do I adjust the corner weights without cutting metal and welding it to the other side? Will "light corner" shock adjustments do the job?

And on a second note, does anyone have suggestions for first time launches? Half RPM, transbrake, half throttle? I like the balls to the wall method, but I'm trying toget a little smarter as I get older.

Thanks in advance,

Steve

zipper06 09-22-2008 03:29 PM
Re: Re
 
Originally Posted by ssym
Maybe I should have expressed my lack of knowledge and experience with chassis and four link....

I am not sure what will happen the first time I launch.

How do I adjust the corner weights without cutting metal and welding it to the other side? Will "light corner" shock adjustments do the job?

And on a second note, does anyone have suggestions for first time launches? Half RPM, transbrake, half throttle? I like the balls to the wall method, but I'm trying toget a little smarter as I get older.

Thanks in advance,

Steve
I'm not saying it will work for you but, i adjust everything nutural, then put a couple turns on the right rear coil, then use foot brake so it doesn't leave too hard or point the front end in the air, that way i still have some control just in case it does pull one way or the other.

JMO


Zip.


All times are GMT -8. The time now is 10:59 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page