What about the fram HP6 big dia filter? I ran one on my old turbo motor and never had a problem with it . oil pressure was always around 85psi during the run

Why would you want to run any Fram filter if you know they have so many problems and you know that Wix (or a few other brands) do not have any problems??
Bottom line for me is I WILL NOT BUY ANYTHING FRAM and why should I take a chance? My Wix filter, part # 51016R is proven!
BTW. my oil pressure in my stock '94 350 was always around 45psi until the last few miles that it dropped to less than 5psi because of FRAM.

I've been using fram racing filters, not the stock ones and have had no problems with them in 10 years.

You might want to read the rest of this thread and then even though you have able to run Fram for as long as you have you just might change your mind!

any questions about fram answered here. TTT

DON'T BUY FRAM OIL FILTERS !!!!!!!!!!!
 

I had an old guy tell me once "a piss poor mechanic blames his equipment. :wink:

Re: DON'T BUY FRAM OIL FILTERS !!!!!!!!!!!
 

A filer only keeps the big piece's out :wink:

Re: DON'T BUY FRAM OIL FILTERS !!!!!!!!!!!
 

And a filer makes big pieces... :wink:

Re: DON'T BUY FRAM OIL FILTERS !!!!!!!!!!!
 

The good thing for Fram is I can NEVER blame it on one of their filters again because I will NEVER put a Fram filter on any of my motors again.