Need help setting up track bar (sportsman tube chassis)

[rickycampbell]

I bought the car and the ladder bar rear end was already set up. everything but the track bar. I thought about wish bone or x bar but i still got motor,tranny and odds and ends to go.Any help will be appreciated.
R.C.

[TS1955]

If you are referring to the diagonal link, you adjust it so the rear end is centered in the chassis.

TS1955

[rickycampbell]

Do i install the track bar (diagonal Link) first or square the rear to the chassis then install the track bar

[rickycampbell]

got it.
R.C.

[injectedrat68]

got it.
R.C. I believe you want 1/2 the amount of total thread sticking out on each end. The other half will be threaded in the diginal link. And yes i would try and square and center as close as you can,. then connect dig. link. Dont forget to set pinion angle(get as close as you can) once motor & trans. in you can readjust.