View Full Version : JOEL AVERY Of HORN LAKE MS. IS A THIEF SCAMMER
dentmagnet
07-13-2012, 03:17 PM
I bought a supposed 400 main dart block ready to run from Joel and he shipped me a blown up un usable 350 main block for my 1650.00. He wont return my emails or phone calls and i have begged and pleaded with him to make this right. If anyone knows JOEL AVERY of HORN LAKE Mississippi, 901 921 4610 please point him to this post so he knows hes famous now
Did you buy it on RJ ?
Ad number ?
dentmagnet
07-13-2012, 04:43 PM
Yes, the ad is expired now but I have a link:http://www.racingjunk.com/Blocks/2639583/Dart-Little-M-block-billet-mains.html or 2639583
I did send him a note. Let's see if he has anything to say.
looks like he just joined
Javery (#635967)
Member Since: 2012-06-22
Here is the Ad:
Dart Little M block billet mains
Ad #2639583 Posted:2012-07-02 14:44:04
This ad has been marked as sold.
$1,400.00
Used .030 over Dart little M racing block with
Billet mains. Clearenced for 4 inch stroke or
434 cubic inches.
Seller Phone Number: 901-921-4610
This item is USED
Trades ACCEPTED: Bass boat, ATV, Street bike or mustang, malibu or nova.
Payment options:
Item Location: HORN LAKE, MS Get Directions To This City
Instructions for buyer: $1400 cash price trade value must be atleast $2500. No calls after 9pm. Local pick up only.
NO SHIPING.
This ad has been marked as sold.
THERATTLER
07-13-2012, 06:32 PM
ad says local pick up , no shipping... did you pick it up in person ?
ad says local pick up , no shipping... did you pick it up in person ?
I was wondering about the local pickup thing too, but it sounds like he had it shipped for the 1650, since he was asking 1400
zipper06
07-13-2012, 07:47 PM
I don't know a Joel Avery, but i have lot's of fellow racers in North Miss. that may know him, i in fact have a residence up there myself. Looking at the ad i donot see where it says 400 mains, so it must have been verbal. Not taking side either way, but you didn't say what was blown up on the motor :?: I will say that a Dart lil M block with billet mains goes for about $2300.00 depending who you buy it from. Also the 350 main motor is much better than a 400 main motor anytime, not JMO but fact. It sounds like it's a 4.155 bore, it can be bored to 4.180 safely if there are no cracks or damaged area's in the blk. if that's the case i think you got a pretty good deal at $1400.00.
JMO
Zip.
dentmagnet
07-13-2012, 09:25 PM
He shipped it to me for 250, thus the 1650. And the 400 main thing was verbal. And when i said blown up, i mean blown up. He sold it (verbally) that is was ready to run. Number 5 main was beat up and wallered out that the main cap and block register was hammered badly, and the main thrust area was actually bbroken and cracked. and someone had peened the block at a feeble attempt to tighten the register back up. an expensive repair and hardly (ready to run" Also obvious evidence of a thrown rod in 7 & 8 area.
zipper06
07-14-2012, 06:10 AM
He shipped it to me for 250, thus the 1650. And the 400 main thing was verbal. And when i said blown up, i mean blown up. He sold it (verbally) that is was ready to run. Number 5 main was beat up and wallered out that the main cap and block register was hammered badly, and the main thrust area was actually bbroken and cracked. and someone had peened the block at a feeble attempt to tighten the register back up. an expensive repair and hardly (ready to run" Also obvious evidence of a thrown rod in 7 & 8 area.
I stand corrected, with that kind of damage you definately got screwed, maybe that's why he decided to ship the block because anyone looking at the block in person would not have bought it. i'll ask around and see if anyone knows this person.
Zip.
No response from him so far either.
Harb, Beast, Mopar, Rabbit ,Maniac and others, maybe y'all should invite him on here too :P
THERATTLER
07-14-2012, 07:51 AM
I noticed he just joined R. J. June 22 , 2012 probally just to unload the block :roll:
dragonmaster093
07-14-2012, 08:40 AM
sent him a message today
dentmagnet
07-14-2012, 10:10 AM
Appreciate what any of you guys can do, I know Im screwed unless I
I hop in my truck and drive out there but $500 min. in fuel and 4 days of my time...Just makes it more expensive...I will file a complaint with the ICC monday, what else can I do?
Here is his reply to me:
Thanks but I have not scamed anyone. My post was listed pick only he called me wanting me to ship. If I was trying to scam I wouldn't let people come to my house with my wife and kids if I was selling junk.
I'll see if he will come on here!
dragonmaster093
07-14-2012, 03:48 PM
From:
Javery
To:
dragonmaster093
Date:
2012-07-14 18:43:06
Subject:
Re: Dart Little M block billet mains
Re:
Ad #2639583 - Dart Little M block billet mains
On [2012-07-14 12:38:46] dragonmaster093 wrote:
> hey you need to come over to the forums you arre being accused of selling a junk motor and being called a scammer come tell your side
I don't care what he is saying. I posted on my ad pick up only. He called me asking me to ship it. If I was trying to scam anyone I would not have had it listed pick up only and let people come to my home.
This was my reply
> Could you come to the forum and see if y'all can work it out?
> I am not siding with anyone, I am only telling you that your name is being trashed over there and they are only hearing one side. You may want to get it straight.
> Sorry for the problems
>
> Have a good day!
> I sent him a perfect block with no damage and now he wants a refund. He told me the reason he wanted my block was because he had blown his motor up. Now he wants me to give him my block and a refund and send his blown block back to me. I don't think so. That's why I don't like to ship anything. The scammer is the man trying to get a free dart block out of deal
Keith Monague. He has made threats on voice mail trying to bully me. I don't respond to threats and he wonders why I won't return phone calls. If he wants to try to scam someone it won't be me. He can post what ever he wants about me.
dragonmaster093
07-14-2012, 05:03 PM
he was here when I posted my last post but didnt bother to defend himself here
hmmmmmmmmmmmmm
dentmagnet
07-14-2012, 05:13 PM
This is a pathetic response, I think you and all will agree. Yes I asked him to ship it, what does that have to do with the fact that he sold me a junk block? No body even came by his house and looked at it and If they had and knew anything I guarantee they would have seen what a POS it was. Ask him why he wont return my calls and emails if he is so innocent?? He has cut me off completely because he knows he doesnt have a leg to stand on. He also lied about putting insurance on the block. He told me it must have been damaged in shipping (cough) and that I need to file a claim, I them told his voice mail because he wont pick up the phone, that he is the shipper and he must file the claim, to which of course he had no reply.
dentmagnet
07-14-2012, 05:20 PM
And in reply to that last resoponse, I sent him pics of his block and he should have clearly recognized it was his since he just shipped it to me 3 days prior, I guess the only way this is gonna be resolved is if i load up HIS junk block and drive it over there to him, lets see him talk his way out of that one.
dentmagnet
07-14-2012, 05:25 PM
This just frys my shorts! This guy ships me a POS blown up block and tries to make me the bad guy! Joel, If this had been a nice block and 400 mains you would have gotten ONE call from me, and that would have ben to say thank you. I am not a thief or scammer and never have been, this is all because he had NO IDEA what he was selling and now he wont make it right.
BEAST477
07-15-2012, 04:25 AM
Can you post some pics of the damaged areas?
gmanxss
07-15-2012, 06:48 AM
DID EITHER OF YOU GUYS BOTHER TO RECORD SERIAL NUMBERS ON THE BLOCK IN QUESTION? SEEMS THIS WOULD PUT AN END TO THE WHOLE THING. :idea: :idea: :?: :?:
dentmagnet
07-15-2012, 09:23 AM
Will post pics tomorrow, and it would have been up to the seller to record a serial number before he shipped it to me I would have if was selling.. This is a lost cause, Joel is being totally irrational and rediculous with his accusations of whqt i was supposedly "trying to pull" I can see with people like him you are beating your head against the wall. Even if i drove 1500 miles and confronted him with HIS block i am sure that he would deny that it is his. It hopeless with assholes like this. I will keep trying to reason with him but Im sure I will get nowhere.
dentmagnet
07-15-2012, 09:35 AM
Joel, you chicken **** why wont you talk to me or come on here and defend yourself??? I think everybody knows why...
Is it even a Dart block?
I have seen him logged in here too, but no replies!
Maybe Zip will find someone that knows him.
That's a lot of cash for a boat anchor. :(
Javery
07-15-2012, 01:28 PM
I haven't done anything wrong. I do not fill the need to explain my self to any of these people on the post. I shipped a perfect dart block with 400 mains. If he wants to rant and rave about me then he can do as he pleases. I have better things to do then worry about what everybody thinks. He can make all the threats he wants. That's why I will not ship anything else to anybody. Because of crap like this.
dragonmaster093
07-15-2012, 01:36 PM
the problem is it ruins your rep on this and many other sites for ever selling anything and have a holier then thou attitude while people are trying to find out the truth to either help prove weather your inocent or guilty of wrong doing doesnt look good in your favor lokks of people come on with that attitude most were the guilty party
I haven't done anything wrong. I do not fill the need to explain my self to any of these people on the post. I shipped a perfect dart block with 400 mains. If he wants to rant and rave about me then he can do as he pleases. I have better things to do then worry about what everybody thinks. He can make all the threats he wants. That's why I will not ship anything else to anybody. Because of crap like this.
You do not have to explain yourself to me! I am neutral !
Just wanted you to come on here and see what was going on and get it straightened out.
This section of the forum is a tool we use to know who to buy from and who not to !
Did you record the serial numbers on the block ?
Again, sorry for the problems to both parties involved.
THERATTLER
07-15-2012, 02:15 PM
how in the hell does a block go from a 400 main to a 350 main by being damaged in shipment ? bullchit
dentmagnet
07-15-2012, 04:09 PM
Yes Joel, please explain that to me, HOW does a block get shipped from Ms. with 400 mains and arrive in AZ with 350 mains??? Every one can see that your full of shit right there. You are condenming your self with your own stupidity.
dentmagnet
07-15-2012, 05:19 PM
Joel, I am done ranting, But you gotta admit, youd be pissed to if you paid 1650 for a block and shipping and you recieved it and its not even what it was supposed to be and worn out and damaged on top of that and when I confrointed you about it you told me "there is nothing i can do" Wouldnt you be pissed Joel?? Cause that is axactly what you did to me! And tomorrow i am posting pics here so everyone can judge for themselves Joel. And your rediculous notion of me trying to ship my block back to you and obtain a refund to cheat you out of a block is just F**ing rediculous!! And finally, why wont you call or email me as i have pleaded now for 3 days so that we can work this out?? I'll tell you why, cause you know Im right and you are coward with no balls to man up and make this right for me. Please step up and make this right Joel, you just might get my respect back if you do. till then you are trash to me and By the way I filed a complaint with the Ic3 so you will be hearing from them.
Javery
07-15-2012, 06:12 PM
You can file what ever bogus claim you want. I have spoken to a family member who is an attorney. I have made him aware of the situation. I will return the favor of a slander suite if you keep on making false allegations and bashing me online. Have a nice day.
dentmagnet
07-16-2012, 07:22 AM
You forget Joel. I have the block, the one that YOU sent me and guess what Joel I also have the pics that YOU sent me of the very same block before the sale and guess what? They match. I have the proof that you are wrong and you have nothing but your lies. Who do think would win? Now man up and make this right And I have an attorney for a father in law, you think Im scared? Im not scared of a thing cause all you have done is spout BS and I have all the proof Joel!
fast75vega
07-16-2012, 07:39 AM
You forget Joel. I have the block, the one that YOU sent me and guess what Joel I also have the pics that YOU sent me of the very same block before the sale and guess what? They match. I have the proof that you are wrong and you have nothing but your lies. Who do think would win? Now man up and make this right And I have an attorney for a father in law, you think Im scared? Im not scared of a thing cause all you have done is spout BS and I have all the proof Joel!
well... post up the pics and we will be the judge :wink:
Harbone
07-16-2012, 07:44 AM
so far its just "he said, he said" and not any proof. Now if you have pics of the block he sent you before you received it and after, that would be interesting to see. My question to the seller is, did you actually have this motor or was it something you got from someone and they told you it was "this and that"? Seems to be a lot of that going around lately...
fast75vega
07-16-2012, 08:17 AM
Also the 350 main motor is much better than a 400 main motor anytime, not JMO but fact.
Zip.
i was thinking the same thing brutha :D
dentmagnet
07-16-2012, 08:52 AM
http://i561.photobucket.com/albums/ss60/keithmanogue/JoelDartBlock012.jpg
http://i561.photobucket.com/albums/ss60/keithmanogue/JoelDartBlock011.jpg
http://i561.photobucket.com/albums/ss60/keithmanogue/JoelDartBlock008.jpg
http://i561.photobucket.com/albums/ss60/keithmanogue/JoelDartBlock007.jpg
http://i561.photobucket.com/albums/ss60/keithmanogue/JoelDartBlock006.jpg
http://i561.photobucket.com/albums/ss60/keithmanogue/JoelDartBlock005.jpg
http://i561.photobucket.com/albums/ss60/keithmanogue/JoelDartBlock004.jpg
http://i561.photobucket.com/albums/ss60/keithmanogue/JoelDartBlock003.jpg
http://i561.photobucket.com/albums/ss60/keithmanogue/JoelDartBlock002.jpg
http://i561.photobucket.com/albums/ss60/keithmanogue/JoelDartBlock001.jpg
dentmagnet
07-16-2012, 08:57 AM
Here the pics of the "perfect Block" Joel shipped me, As you can see #5 main is hammered badly the cap and the register in block is so worn that the cap can move around a quarter of an inch, I place a pic of HIS main cap with the bolts in it and my 400 main cap so he could see the difference. Also can see a useless attempt by someone to try and peen the register tight.
fast75vega
07-16-2012, 09:08 AM
hey dent, edit your post. after each pic tag... hit enter twice so it spaces them out and on top of one anthoer. posted the way they are now... makes it to hard to see them :wink:
the block looks bad but im confused on the main caps pic ?????
dragonmaster093
07-16-2012, 11:05 AM
fast top main is one from block 350 size bottom is his own 400 main the one block is suposed to be
dragonmaster093
07-16-2012, 11:16 AM
and as far as the 350 mains vs. 400 mains in what is better is IMO a mute point cause I'm assuming he bought the block to go with parts he already had. from what i see the point here is its plain old junk. now would like to see the pics that were sent and same shots taken of this motor in pics to see if there are visible marks and or numbers to compare
fast75vega
07-16-2012, 11:26 AM
and as far as the 350 mains vs. 400 mains in what is better is IMO a mute point cause I'm assuming he bought the block to go with parts he already had. from what i see the point here is its plain old junk. now would like to see the pics that were sent and same shots taken of this motor in pics to see if there are visible marks and or numbers to compare
ok.. thats why i was confused on the mains ....lol i too think that block is junk and would like to see the pics he sent you?
the 350 mains are actually thicker and stronger and your better off with a 2 bolt main block and have the splayed caps installed.
dentmagnet
07-16-2012, 02:55 PM
First pic is what he sent me before sale, second pic is in my shop after unloading it. Note the "RK" scratced in it
[/img]http://i561.photobucket.com/albums/ss60/keithmanogue/photo.jpg
http://i561.photobucket.com/albums/ss60/keithmanogue/JoelDartBlock.jpg
dentmagnet
07-16-2012, 05:17 PM
Joel sent me a PM this morning, said he did nothing wrong and that he was going to sue me cause he has a lawyer in the family. but still he is too chicken shit to call me and fix this screwing he gave me. But i still say here and now that JOEL AVERY FUCKED ME AND IS A THIEF AND A SCAMMER! I have begged and pleaded with him to fix this and he is just hiding and chooses to do nothing, So Sue me you piece of shit, I dare you cause my lawyer will spit your lawyer out his ass. You are the worst kind of people on this planet. You dont deserve to breathe the same air the rest of us do. You need to fix this and I will eat every word I said because unlike you, I am a man of my word
Incognegro
07-16-2012, 06:47 PM
Yup, seems like you got taken for a ride pal..Sorry to hear.
THERATTLER
07-16-2012, 08:21 PM
pictures are worth a thousand words...looks like same block to me , to suggest that that kind of damage was done in shipping is pretty funny .
and HE's sueing YOU ? thats even funnier.... JMO
dentmagnet
07-17-2012, 07:33 AM
Yes pretty funny indeed, except for the fact that he took 1650 of my money and I got s h i t I will be out that way someday..with the block. This isnt over
pictures are worth a thousand words...looks like same block to me , to suggest that that kind of damage was done in shipping is pretty funny .
and HE's sueing YOU ? thats even funnier.... JMO Maniac, did you miss that he has a lawer in his family! :shock:
dragonmaster093
07-17-2012, 09:20 AM
If the family member lawyer is anything like seller hes one of those greased up slicksters that chase ambulances and file all them "I'll get ya rich law suits"
fast75vega
07-17-2012, 09:21 AM
wonder if this is him.... its the only one i can find in horn lake and it says he's 33 years old
Joel F Avery
5655 Winterwood Dr
Horn Lake, MS 38637-9614
dragonmaster093
07-17-2012, 09:22 AM
I would say 10:1 it is
fast75vega
07-17-2012, 09:27 AM
gotta love internet.... ya just cant hide....lol
Joel F Avery Southaven, MS | 33 years old
Map data ©2012 - Terms of Use
Previous Locations Horn Lake, MS | Southaven, MS | Nesbit, MS
View full addresses >>
Aliases Joel Flon Avery
Relatives Carol A Mcgregor | Joel F Avery
Phone Number Available
Full Address Available
dentmagnet
07-17-2012, 09:36 AM
Yes, thats him.
fast75vega
07-17-2012, 09:47 AM
Yes, thats him.
id be on the first flight down there and be beating my money out his ass if that was me.... id make sure his dental work alone cost more then he took from me before i left in cuffs ....... :wink: just sayin
dentmagnet
07-17-2012, 09:52 AM
Ya just never know...he will get a visit from me...not saying when tho.
Harbone
07-18-2012, 04:06 AM
So Joel, is the pic the buyer posted the one you sent him of the motor before he purchased it???
dentmagnet
07-18-2012, 07:14 AM
He wont answer, He has totally cut me out, not answering emails or phone calls, He would never talk to me from the very beginning. all he told me is "theres nothing i can do" He has been totally unreasonable and irrational just like a woman on her period. Hes just a bitch. and the funny part is before the sale when we were talking he told me he believes in Karma and that he would never intentionally wrong anyone. It just makes me ill everytime I think about the 1650 dollars that bought me 200 lbs of scrap iron
Incognegro
07-18-2012, 02:07 PM
@00lbs of scrap iron could do some damage if accidentally dropped on someones knees.. :lol:
Scooterz
07-18-2012, 04:05 PM
Joel: I know you will see this... because you know what you did is WRONG. Let me save you some time & money: "slander" must be proven. Slander is NOT slander when the buyer has told the truth!!!! So, save your money & use it to make this right w/ the buyer. My personal opinion is that you should be very careful about taking someones money & lying about their character beyond sending a piece of junk like that. You do need to "JUSTIFY" your actions; because there is strong evidence you RIPPED off this man. Something tells me you will be accountable somehow. Shame on you- you have a family??? I am surprised you are so mouthy after such a scam... very selfish to your wife & kids. Get to making this right. You are going to potentially risk the well being of your family????? SHAME ON YOU. You don't need a lawyer; you need to FIX THIS!!!!!!!!!!!
dentmagnet
07-19-2012, 03:15 PM
Well Rigsby, you got to him a little, He sent me an email last nite telling me Im an a s s h o l e and that its between him and I only and to leave his family out of it, so at least we know he cares a bout his family while he's out f u c k i n g innocent people out of their hard earned money. How sweet. I then pleaded with him again to make this right and offered him this:to Joel
Even better, I'll split the cost to ship it back to you, If this is NOT the block that you sent me then ship it back and i will pay the bill, Now how is that trying to scam you? I just want this fixed, I am the one who got screwed here and although It totally depends on you if youre gonna make this right or not, I want it fixed. PLEASE? Do you see this?? How can I be scamming you??
But of course no response. But at least i know one way to get a rise out of him. Just threaten his family, of which i HAVE NOT done is threaten him or his family thru out this whole ordeal.
Scooterz
07-19-2012, 04:21 PM
I was pointing out how irresponsible it is to put innocent families at risk via misrepresentation or deception... it is obvious where he lives... I have seen people make the 5 o'clock news for less. Like I said on the PM to ya earlier; ignorance is no excuse when a chunk of money is in the equation.
I think he knows he should make this right.
dentmagnet
07-19-2012, 04:33 PM
I know what you were trying to impress upon him but he obviously missed the point, not surprising for trailer trash. And yes, I think he knows he needs to fix this too but he is too stubborn to admit it plus he already spent my money and doesnt have a pot to piss in or a window to throw it out of. Pathetic
dragonmaster093
07-19-2012, 04:37 PM
hey now not all of us that live in trailers are trash lol 8)
dentmagnet
07-19-2012, 04:46 PM
Nothing personal Sam, Hell my wife grew up in a trailer and she turned out to be a fine woman. You know the expression "There are N****** in every race" thats where Joel fits in.
dragonmaster093
07-19-2012, 05:00 PM
Oh I know all to well
Javery
07-20-2012, 12:04 AM
No I am not trailer trash. I do not live in a trailer. I am not a ******.
I am not hiding from anyone. You don't have to google my name for info.
I am 33 married with 2 kids. I work for autozone. I live in Hornlake Mississippi. Both my parents are dead. I have a dog. I am buying not renting my home. My previous employers are comp cams, Landers dodge, country ford and Walmart. Anything else you would like to know about me? Keep posting all your comments of what you think about me. The truth is you don't have a clue. Just a bunch of cowboys with a keyboard.
RonOwensRacing
07-20-2012, 06:46 AM
The rk is in a different spot from the first pic .
But either way that damage didn't happen in shipping that block is junk it would cost way to much to have it repaired .
fast75vega
07-20-2012, 06:50 AM
The rk is in a different spot from the first pic .
But either way that damage didn't happen in shipping that block is junk it would cost way to much to have it repaired .
ron....there are two RK's on the same side of the block and the block is upside down in one pic and right side up in the other.... its def the same block
dentmagnet
07-20-2012, 07:12 AM
The truth is, YOU ARE trailer trash Joel because you have no clue what kind of block you sold me and that is why you wont even look at what I am trying to tell you or aknowledge it. If you would and were a man with any integrity at all you would appologize to me and make this right you piece of s h i t. I am done trying to reason with you, Because you cant reason with a MORON. So anyway what i said about you will see this block again...along with me...still goes a s s h o l e !
dentmagnet
07-20-2012, 10:38 AM
No I am not trailer trash. I do not live in a trailer. I am not a ******.
I am not hiding from anyone. You don't have to google my name for info.
I am 33 married with 2 kids. I work for autozone. I live in Hornlake Mississippi. Both my parents are dead. I have a dog. I am buying not renting my home. My previous employers are comp cams, Landers dodge, country ford and Walmart. Anything else you would like to know about me? Keep posting all your comments of what you think about me. The truth is you don't have a clue. Just a bunch of cowboys with a keyboard.
Yes! one thing i would like to know about you, At what point in your life did you turn into a chicken s h i t thieving no good a s s h o l e that blatently rips people off and then tells them to go f u c k themselves??
THERATTLER
07-20-2012, 03:06 PM
OK Dent , we realize you feel ripped off , but you dont have to lower yourself to such a low level, , we feel for you but is this really gonna solve the problem or make it worse ,, ,just saying,,,Paul
dentmagnet
07-20-2012, 03:21 PM
Maniac, I dont feel ripped off, I WAS ripped off for 1650.00! Has it ever happened to you, Do you know how much that pisses you off? I realize I am lowering myself but its the only way i have to bring attention to this low life and hope that some one that actually matters to him will see it and maybe talk some sense into him, Its all i have maniac so i will keep this thread allive as long as i can.
Harbone
07-20-2012, 04:05 PM
I know you are mad but the language and starting the threaten someone will not get you anywhere on this forum...
dentmagnet
07-20-2012, 04:14 PM
I know that and you know that but Im not getting anywhere anyway. He has totally cut me off, wont return phne calls or emails and only responds to me here once in awhile, Hes not gonna fix this so what have i got to lose, I already lost my money, its gone But I will clean up the language per your requests
RonOwensRacing
07-20-2012, 07:19 PM
The rk is in a different spot from the first pic .
But either way that damage didn't happen in shipping that block is junk it would cost way to much to have it repaired .
ron....there are two RK's on the same side of the block and the block is upside down in one pic and right side up in the other.... its def the same block
Sorry i only seen one pic of the block ya i would also say it is the same block i hope you can get your money back some way .
dent. you may just have to take a trip to get some justice i know you dont wnt to but might be the only way.
dentmagnet
07-24-2012, 03:32 PM
Not hiding from anyone Joel? then why did you change your screen name? Guess what folks Javery changed his name and didnt think I would catch it, Buick4life is his new handle, I know Ive been scammed now, this wasnt no accident was it Buick4life?
Harbone
07-24-2012, 03:44 PM
He can change his name but the key is to know his membership number, no matter how much he changes name, the number stays the same. His number is
#635967
dentmagnet
07-24-2012, 04:27 PM
What are you going to do next Joel. pick up and move, change cities and jobs next? You cant hide, When I get my chance to get away Im coming out there with this junk ass non 400 main, non clearanced for 4 inch stroke broken and cracked and worn out 350 main block you shipped me. Count on it.
rpg90
07-25-2012, 07:45 AM
Thats what happens when you buy parts from ppl. at auto zone...
Only option is a ass whooping besides that you will just have to suck it up
Harbone
07-25-2012, 12:35 PM
Thats what happens when you buy parts from ppl. at auto zone...
:lol:
http://talkradiox.com/files/images/autozone%20sucks.jpg
Scooterz
07-25-2012, 03:05 PM
Dent:
I feel your pain. I would be very angry. I believe you got scammed & he needs to make it right. My point in all of this is if he sacmmed a crazy man, he would get an eye for an eye. The wrong guy would take it out of him one way or another. By default; he put innocent children & his wife at risk. I do not condone this kind of payback... but there are many who do. He needs to make this right. PERHAPS HIS EMPLOYER IS NOT AWARE HE IS A THIEF??? Maybe you should call his boss... chances are he has ripped off AutoZone too. He owns a home; so a winning judgement can put a lien on his home he says he owns... bet his wife would love that!!! A few ads in Craig's list in the Hornlake Mississippi area to warn others Javery is a THIEF, maybe a few ads in the local news papers too... YOU CAN MAKE HIS LIFE MISERABLE... yet he gives you info about himself freely... USE IT ON HIM. Pay the 5-bucks to a background check on him, find out who he owes money to, call them, etc... EXPOSE HIM PUBLICLY. Show him what a real "COWBOY" can do!!! You have enough info on this guy, you can get more, too. He wants you to go away... make sure he knows you will know more about him that he knows... at the right time... you will be waiting to cost him much more than 1600+ dollars.
Javery- if you are not a misrepresenting, scamming, coward, etc... THEN PROVE IT. Until then, the evidence shows otherwise. If you scammed me for 1600.00 I would legally remove it from you in pain, embarrassment, exposure, & relentless reminders that could cost you MUCH MORE.
THERATTLER
07-25-2012, 05:12 PM
STILL ON CRAIGSLIST
.
.
Dart Little M Sbc - $100 (Hornlake )
Date: 2012-06-10, 8:15AM CDT
Dart Chevy bare block for sale or trade.
It is .030 over and clearanced for 4 inch stroke
or 434. Summit sales it for $2600 with no machine
work over $3000 with machine work. I will sale it for
$1800 or trade for car truck atv blazer s10
Mustang camero silverado.Tell me what you have
all I can say is yes or no. No calls after 9pm.
901-921-4610.
.
.
.
dentmagnet
07-26-2012, 04:19 PM
So its obvious nobody came to his house to look at it because he had it priced so hi and if they had they would have seen what a POS the block was. Maybe he did have some lookers and they told him what a POS it was and that is what prompted him to put it on RJ for less money. At any rate I was the unlucky sap that came along and made his day...Is that about how it went Joel..or Javery...or Buick4life...or whatever it is this week?
RonOwensRacing
07-27-2012, 05:20 AM
I sell this block a lot .
Dart 31152211 - Dart SB-Chevy Little ''M'' Engine Block
9.025'' Deck Height
4.125'' Cyl. Bore
400 Main Bearings
Nodular Iron Main Caps
Sells for 1999.00
jegs sell it for 2198.99
So 1800.00 for a used block is high
dentmagnet
07-30-2012, 04:44 PM
How much do you sell a 31132211 for? Gonna need to find a block somewhere.
dentmagnet
08-01-2012, 08:50 AM
Joel sent me this last Friday:
This has gone on long enough. I am tired of arguing over it. I will refund the block. I will have to pay you in installments. I don't have it all at once I had to pay on my mothers funeral balance. Not that it really matters. I get paid next Friday and I will start mailing you checks till we are settled. I did not try to scam you regardless of what you think. If this what it takes to stop all of this. Then I guess so be it. I am not the asshole you make me out to be. Have a nice day.
I applaud him for coming around and I told him if he follows thru I will recant everything I have said about him. Now we just wait and see, Joel thanks again and i hope you do follow thru with this.
Harbone
08-02-2012, 04:47 AM
Dont hold your breathe waiting till the cash is in your hands. Keep on him so he doesnt "forget" to send a payment!
dentmagnet
08-03-2012, 04:23 PM
Well i knew it was too good to be true, The a s s h o l e now says he is done, I sent a letter to his wife and his boss pleading with them to talk some sense into him and I actually for a minute thought it might have worked. But now he is using that against me trying to cloud over the fact that he screwed me out of 1650.00! Like I told you in the email joel, I wont quit!
dentmagnet
08-03-2012, 09:09 PM
He is still talking to me...maybe we can settle this yet. Please joel lets settle this
dentmagnet
08-08-2012, 12:15 PM
Joel and I came to an agreement he would pay me what ever he could afford every pay day until the 1650.00 is settled. I just recieved my first payment of 100 dollars today. Thank you Joel and I apologize for all of the name calling and BS that we had to endure from each other. I applaud you for making an effort to resolve this and hope that we can finish it with no further problems. Joel is a good guy for making this right with me, Thank you Joel Avery.
fast75vega
08-08-2012, 12:35 PM
Joel and I came to an agreement he would pay me what ever he could afford every pay day until the 1650.00 is settled. I just recieved my first payment of 100 dollars today. Thank you Joel and I apologize for all of the name calling and BS that we had to endure from each other. I applaud you for making an effort to resolve this and hope that we can finish it with no further problems. Joel is a good guy for making this right with me, Thank you Joel Avery.
that is cool of him but no reason for you to be sorry .... he know what he was doing was wrong and you had to go though all this to get your money back and over the how many weeks too .....!
Scooterz
08-08-2012, 02:37 PM
That is good news Dent!! That took some character to come to an agreement & work this out.
Javery
08-08-2012, 07:33 PM
Just as I said before I never intended or was trying to rip anyone off. I am just tired of arguing with the issue. I am happy that it will be 100% settled very soon. Keith and I can go back to our normal life's. I do apologize for all things said and done.
dentmagnet
03-15-2013, 04:44 PM
Fast forward to March 15 2013: Joel paid me 3 succesive payments of 100.00 per month until Oct. when it all stopped. He says hes having financial difficulties and I understand like the dumbass I am. Then in Jan. he says hes doing his taxes and hes gonna pay me off...never happened. Here it is March 15th and he doesnt return my emails. The way I see it he still owes me 1350.00 and Im getting the feeling Im out 1350.00. Are you still planning on paying me like you promised Joel? I hope so
dentmagnet
03-20-2013, 11:30 AM
Well I believe its official...Joel has officially said screw Keith in his mind, I have been calling and emailing for a week and nothing..nothing at all. If any of you guys want to call him out please do. i am not done with this by a long shot.
dentmagnet
03-21-2013, 04:34 PM
Joel and I came to an agreement he would pay me what ever he could afford every pay day until the 1650.00 is settled. I just recieved my first payment of 100 dollars today. Thank you Joel and I apologize for all of the name calling and BS that we had to endure from each other. I applaud you for making an effort to resolve this and hope that we can finish it with no further problems. Joel is a good guy for making this right with me, Thank you Joel Avery.
that is cool of him but no reason for you to be sorry .... he know what he was doing was wrong and you had to go though all this to get your money back and over the how many weeks too .....!
Well It was too good to be true, Joel has written me off so naturally I will have to take back the above paragraph. I am sorry for the day that i first saw his ad and will try and be more careful next time. Eat shit and die Joel Im done with you