SBC Spreadport headers for 67 CHEVY II

[ImBack]

Any suggestions? Has a Heidts front clip with 26" between frame rails and a rack. Been looking for a month without alot of luck.
Hedman makes a #65023 thats says its for a 67-69 Camaro but i found them doing a ChevyII search on their site.

[markdunlap]

You have a new private message. Look at the top of the page.

[JEFF69Z28]

lemons headers

[ImBack]

You have a new private message. Look at the top of the page.

THANKS

[ImBack]

lemons headers
I was just looking for an off The shelf Header trying to save time and money

[zipper06]

I'm thinking you will have to get fenderwell headers if you want off the shelf. It's hard to get under the frame headers inside a 26" W frame, plus starter interferrance problems. Maybe some S10/sm/blk conversion headers. Hooker makes some fenderwell headers that are 1 7/8" or 2" i think. But they are like $500.00

Zip.

[Pwmax]

Spread Port, meaning like a bigchief style head? If so, good luck. You will need customs. Possibly Lemons has something.

Frank

[zipper06]

Spread Port, meaning like a bigchief style head? If so, good luck. You will need customs. Possibly Lemons has something.

Frank

He's talking about the heads with Stahl bolt pattern instead of the straight line on most 23* heads.
I THINK.

Zip.

[ImBack]

Yep,the Stahl 7 bolt,bolt pattern. I found some Hedman 65023's when i was on Hedmans website searching for ChevyIIs but when i clicked on them it said they were for 67-69 Camaro???? Their $686 through Jegs uncoated,thats the cheapest ive found,Stahls are $1125 and Lemons$1500

[zipper06]

Yep,the Stahl 7 bolt,bolt pattern. I found some Hedman 65023's when i was on Hedmans website searching for ChevyIIs but when i clicked on them it said they were for 67-69 Camaro???? Their $686 through Jegs uncoated,thats the cheapest ive found,Stahls are $1125 and Lemons$1500

Did you look at the S10/sm/blk conversion fenderwell headers :?: I know they will clear your narrow frame.


Yep i have a set of Lemon's build for a 1980 Malibu under the chassis (2" to 2 1/8" step) the guy i bought them from paid $1350.00 plus $150.00 for the 8 EGT bungs

Zip.

[JEFF69Z28]

spread port heads on sbc, the two inner exhaust ports are further apart than stock type ports.

[ImBack]

Yep,the Stahl 7 bolt,bolt pattern. I found some Hedman 65023's when i was on Hedmans website searching for ChevyIIs but when i clicked on them it said they were for 67-69 Camaro???? Their $686 through Jegs uncoated,thats the cheapest ive found,Stahls are $1125 and Lemons$1500

Did you look at the S10/sm/blk conversion fenderwell headers :?: I know they will clear your narrow frame.


Yep i have a set of Lemon's build for a 1980 Malibu under the chassis (2" to 2 1/8" step) the guy i bought them from paid $1350.00 plus $150.00 for the 8 EGT bungs

Zip.

Thanks,i'll have to check the S10 headers out.

[ImBack]

spread port heads on sbc, the two inner exhaust ports are further apart than stock type ports.

Yea to keep center 2 ports from getting hot,kind of a pain for headers unless its a round track car,then theirs plenty of options.

[JEFF69Z28]

SCHONFELD HEADERS

[ImBack]

SCHONFELD HEADERS

YEP,think their about my best option.Engine builder has 3 sets of spreadport dyno headers to try and said we'll find something that'll fit.Had a set on my old 79 Malibu and were the best fitting headers ive ever had.