View Full Version : Rear end for a 92 v8 S10
Frankracing
12-27-2011, 04:52 PM
Does anybody know what is a good Strong Rear end that will fit good for this Truck ? Its a Real nice 355 Truck. Might want to Drag it now & then. Has a 10 bolt posi. Chevy Rear, Forgot what they call it. But I have heard its not Good !!! Thanks for any & all help !!
lively
12-27-2011, 04:54 PM
it is a govelock-----TOTAL JUNK AS SOON AS YOU GET BITE
RUNNING SLICKS--go to a well setup 10bolt/9 inch ford/ or 8 3/4 chrysler
dragonmaster093
12-27-2011, 06:00 PM
i beleive nova and older camaros will bolt up i that helps
outlaw256
12-28-2011, 04:00 AM
RUN A BIG BEARING FORD 9 .PARTS ARE PLENTIFUL AND CHEAPER THAN CHRYSLER 8 3/4. BOTH ARE STOUT REAR ENDS STRAIGHT FROM THE FACTORY!
have a good rear end narrowed down, your only as strong as your weakest link I used to run a 8 3/4 mopar with 30spline moser axels, my wifes s10 has my third member and she now has a another mopar, my s10 blazer now has a dana 60 40 spline and of course a ford 9" would be a good choise and a good strong 12 bolt chev would also work
TheYellaBrick
12-28-2011, 08:00 AM
My moto is "OVERBUILD!"
:D :D :D
My moto is "OVERBUILD!"
:D :D :D
x2
outlaw256
12-29-2011, 04:09 AM
mine too DD, i rather spend some now than alot later.took me awhile to fiqure that one out but it works lol
hogzilla89
01-13-2012, 10:24 AM
the 8.8 explorer rear is a good swap also.
lookingaround
01-13-2012, 11:29 AM
the 8.8 explorer rear is a good swap also.
X2...you can get one with a 4.10 gear and limited slip for around 125 at a pull a part junk yard
zipper06
01-13-2012, 08:06 PM
the 8.8 explorer rear is a good swap also.
X2...you can get one with a 4.10 gear and limited slip for around 125 at a pull a part junk yard
Where you been old timer, haven't seen you around for about a year, did you get that S10 down the track yet?
Zip.