Harbone
03-18-2011, 05:36 AM
I have a ZZ4 motor that seems to seep a little oil up through the intake bolts. Never had this problem with any other small block I have ran but have never had a ZZ4 motor. Would taking the bolts back out and putting teflon on help?
zipper06
03-18-2011, 08:36 AM
Would probably work but ARP bolt sealer would work better, it's teflon paste, a cheaper version is available at your local hardware it's also teflon a plumbing sealer about $4.00 for a small tube.
JMO
Zip.
Harbone
03-18-2011, 09:22 AM
Thanks Zip!! I actually have some teflon paste left over from redoing my upstairs bathroom vanity 2 weeks ago.