Message i just got

[mopar1968]

Message i just got ; And notice no honor payment's :!: :!:

From: MidsouthHotrodz To: mopar1968 Date: 2010-09-19 19:42:39
Subject: hey!
hey here is my new ad number Ad #1996532. Thought i would let you know so you can put it on the forum!! :)

[MEMRACING62]

now....whats a mopar man going to do with dem chebby parts :roll: :P

[mytmouz]

Wait forever for them to not show...

[hollowayshotrods]

Midsouthhotrodz,

While you are being a dickhead and sending smart ass emails, try making an honor payment!!
I find it hard to believe you don't know why folks pound on you!!


Seller Information
Ad posted by:
MidsouthHotrodz (#208473)
Member Since: 2007-07-21

Phone Number: 1731-610-6020

Member Feedback
Number of Honor Payments: 0
Average Accepted Sale Price: $275.00
Average Honor Payment: $0.00

[zipper06]

One of the funnest things about this ad, is he doesn't have what he's advertising, IE main stud girdle and studs. They don't make a MAIN STUD GIRDLE, for a b/blk chevy, atleast that i've every seen.

Zip.

[suicidebomb]

Zip, I'm not real sure about this, but I think cepx111 has a stud girdle on his 496. Seems like a couple of years ago, he was show and telling it when someone was poking fun at him, about his lower end loking like a Ford.

[cepx111]

You'd be right Earl.

http://i187.photobucket.com/albums/x266/racecarx111/S3010575.jpg

[zipper06]

Well i be go too h%ll, that's the first one i've seen :oops: , who makes that piece? Also do you have to grind the top of the caps for it too fit?
Probably a good thing for a 2 bolt block. Guess i better get up to date on the big blk stuff, i haven't ran one since 1985, but built a couple 4 bolt main ones.

Zip.

[fla1976]

Here is one on EBay.

http://stores.ebay.com/1Raceparts/_i.html?_nkw=girdle&submit=Search&_sid=40548947

http://cgi.ebay.com/ebaymotors/BILLET-MAIN-STUD-GIRDLE-BBC-BB-CHEVY-454-502-RP-/230518043219?pt=Motors_Car_Truck_Parts_Accessories&hash=item35abf23253

[cepx111]

Zip, mine was a cat power peice, fit on the caps was fine, no machining required but due to oil pan & oil pump fitment issues, I sidelined the thought.


Cp

[bigray]

we tryed one.. but had some oil pump pick up and windage tray interference, still setting on the shelf

[BEAST477]

Aw come on guys, the reason they haven't made any honor payments is because they have never had any luck selling here on RJ. :cry: But they claim to be good sellers. :? Kind of an oxymoron isn't it :?:

Come on Midsouthhotrodz do you expect us to believe that you have never sold anything on here :?: Get real.

[mopar1968]

Well guy's and gal's i had to block this loser from sending me messages, He was sending two to three daily. He was telling me that i needed to get a job and stay off RJ and the forum. Can you believe that i have worked since i was 13 years old.

[MEMRACING62]

things must be a little slow down in selmer :roll: :roll: they seem to have the time to pester people. :roll: :roll:

[Scorpion1110]

Well guy's and gal's i had to block this loser from sending me messages, He was sending two to three daily. He was telling me that i needed to get a job and stay off RJ and the forum. Can you believe that i have worked since i was 13 years old.

Seems there was a lack of HONOR .......................payments.

[Harbone]

why dont he come on here and complain about Mark picking on him?? :lol:

[mopar1968]

Chris try sending him a message asking him that, I don't want to get him started again :!: :!:

[mopar1968]

http://www.racingjunk.com/category/102/Chevrolet/post/2000125/1970-CHEVY-EL-CAMINO.html