degreeing a cam

[bowhay]

how is this done?

[contagious]

Here's a link that may help.




http://www.lunatipower.com/Tech/Cams/HowToDegreeACam.aspx

[kwkracing]

Put it in straight up and move on

[cepx111]

Put it in straight up and move onlol

[Tod74]

Use the intake centerline method. All you are doing is making sure the cam is where it is supposed to be when installed "straight up" Sometimes they are off quite a bit due to tolerance stacking. I degreed the solid rollers I've used but flat tappet street stuff I never bothered.