new ptoject

[dragonmaster093]

any one have a decent rear deck wing for a 88 formula fire bird
http://i783.photobucket.com/albums/yy119/dragonmaster093/gegm/066.jpg
http://i783.photobucket.com/albums/yy119/dragonmaster093/gegm/065.jpg
http://i783.photobucket.com/albums/yy119/dragonmaster093/gegm/064.jpg
http://i783.photobucket.com/albums/yy119/dragonmaster093/gegm/063.jpg

[burnskustomz]

I believe I know where one's at!! I'll check up on it seeing that I have to go get some camaro parts soon.

[burnskustomz]

Ok I am looking at a picture of it on an old broken down laptop so I can't upload it but guess what it's on a red t-top car the wing is black not sure about the 3rd brake light but it looks similar from what I can see I'll try to get pictures of it up if possible. But no promises. LOL

[burnskustomz]

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs159.ash2/41311_144187865601486_100000308193338_292747_64808 08_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs319.snc4/41311_144187862268153_100000308193338_292746_63446 02_n.jpg

Sorry that they aren't up close but thats the only photos I have. But I'll check up on it.

[dragonmaster093]

the one on the bird is correct but check and make sure its not spongey or soft. mine is in that condition almost like a sponge all soft

[burnskustomz]

Ok I will. I new I had seen one on a car but took me awhile to find it and get where I could upload it. But yea I'll see how much he'd want and see if it's any good.

[dragonmaster093]

cool

[dragonmaster093]

ok guys heres a cunundrum im having car came with another tbi 305 but i have my carbed 350 now some peopple say the torque tube set up sucks but i dont have any experience plus what would have to be done to convert to carb set up current intank pump is either shot or relay bad so what would have to be done to convert

[DirkaDirka]

I dont know if it would be the same but in my 84 Chevy truck I went from teh computerized carb to a regular carb and just switched carbs. Still have the same intake that was installed on the 350 that was in the truck on the 400 that is in the truck now.

[dragonmaster093]

diff dirka this fuel injected throttle body 305 vs. carbed 350 this car has pump in tank vs, mech on block

[DirkaDirka]

Isnt there a blocker plate on the block where a fuel pump would go on the TBI engine??

I didnt realize the differnces between the two. It was late at night when I replied and I wasnt thinking clearly. LOL

[MEMRACING62]

Isnt there a blocker plate on the block where a fuel pump would go on the TBI engine??

I didnt realize the differnces between the two. It was late at night when I replied and I wasnt thinking clearly. LOL NOPE

[Tod74]

Put a sump kit in the tank and put an electric fuel pump mounted under the car.

[MEMRACING62]

IF ITS GOING TO BE JUST A STREET CAR THIS WILL WORK, PUTS OUT SAME AS STOCK MECH PUMP, NO SUMP REQUIRED JUST PUT IT IN THE FUEL LINE. IVE USED THESE IN PLACE OF STOCK FUEL PUMP WHEN CAM LOBE TO DRIVE PUMP HAS WORN OUT. http://www.summitracing.com/parts/ACF-EP90/

[Tod74]

I am confused. Do you want to use the block that has provisions for a mechanical pump or do you want to use the block without mechanical pump?

[Tod74]

IF ITS GOING TO BE JUST A STREET CAR THIS WILL WORK, PUTS OUT SAME AS STOCK MECH PUMP, NO SUMP REQUIRED JUST PUT IT IN THE FUEL LINE. IVE USED THESE IN PLACE OF STOCK FUEL PUMP WHEN CAM LOBE TO DRIVE PUMP HAS WORN OUT. http://www.summitracing.com/parts/ACF-EP90/

I like that.

[dragonmaster093]

just trying to deside wich way to go and if i went with my 350 and new holley mech pump if i can just splice in to fuel line (since in tank pump not working) or if i have to do a bunch of other mods to fuel system or do i get a block off plate and run the electric pump and get a regulator or just put tbi 305 that came with the car ( a used replacement) and run it. its a mostly street car maybe few fun runs next year at street fights here in bristol

[Tod74]

just trying to deside wich way to go and if i went with my 350 and new holley mech pump if i can just splice in to fuel line (since in tank pump not working) or if i have to do a bunch of other mods to fuel system or do i get a block off plate and run the electric pump and get a regulator or just put tbi 305 that came with the car ( a used replacement) and run it. its a mostly street car maybe few fun runs next year at street fights here in bristol

I would want the dead pump out of the tank. Not sure if you can pull fuel through it with another pump spliced into the line or not. I am not a fan of using hard line and the needed fittings and clamps. If budget allows I would run braided line and a sump in the tank. nice clean safe way to go.I do like the pump MEM linked to though...just unsure about pumping through the dead pump in tank.

[dragonmaster093]

can pump be removed and piece of line put in its place

[MEMRACING62]

anything can be done.....WERE HOT RODDERS! :lol: dont think trying to pull through a dead pump would work.

[dragonmaster093]

well ill try to rplace pump with tube if works cool if not ill try somethong else

[Tod74]

well ill try to rplace pump with tube if works cool if not ill try somethong else

It might not hurt to try and pull fuel through the dead pump...I have my doubts but you never know. What's the worst that could happen? It won't work...then you just do what you planned and take it out. You never know til ya try.

[MEMRACING62]

wonder if the tank unit out of a carbed gen 3 would fit that tank, if so change tank unit. :idea:

[dragonmaster093]

any body even know how much fuel pressure those tbi pumps run?

[dragonmaster093]

update car is gone