Hose Sleeves

[jreiley]

Is there a good way to cut these stainless hose sleeves to fit hoses I want tp cover? Hack Saw is not the best.

[fla1976]

Wrap the point where you want to cut with vinyl tape and cut it with a dremel tool.

[TheYellaBrick]

I wrap mine with duct tape and cut with a cutoff saw. If you use a cutoff wheel on a die grinder or a cutoff saw, go SLOW so you don't catch the braid and unravel it all over. Just eeeeeease through it.

[Scooterz]

Amen on both of those comments... make sure you wrap it tight.

[bowtie4542001]

Same here, I just wrap the part I need to cut with tape and cut it with a cut off wheel.

Chris