PDA

View Full Version : bbf in 88 camaro

bigkahun74
06-25-2010, 07:18 PM
Would like to drop a Bbf into a 88 camaro. Has anyone tried this. What are the big issues that I'm going to run into. Thanks for your info.
Tod74
06-26-2010, 03:32 AM
http://i237.photobucket.com/albums/ff253/Tod74/warfgif-1.gif
ajk
06-26-2010, 05:34 AM
http://i237.photobucket.com/albums/ff253/Tod74/warfgif-1.gifLMAO Why,Why?
itsabird
06-26-2010, 07:53 AM
http://i237.photobucket.com/albums/ff253/Tod74/warfgif-1.gifaaaahhhhhhhhhaaaaaaahaaaa!!!!!!!!!! where is lively? :lol: :lol: :lol:
Drtmod5
06-26-2010, 07:56 AM
http://i237.photobucket.com/albums/ff253/Tod74/warfgif-1.gif

You've GOT to be chitting me????????? :roll: :roll:
DirkaDirka
06-26-2010, 09:22 AM
http://i237.photobucket.com/albums/ff253/Tod74/warfgif-1.gif

Is everybody going to quote Todds post??
MEMRACING62
06-26-2010, 09:56 AM
http://i237.photobucket.com/albums/ff253/Tod74/warfgif-1.gifyes !! it sums it up!! :lol:
cam67152
06-26-2010, 08:03 PM
http://i237.photobucket.com/albums/ff253/Tod74/warfgif-1.gif

VERRRRY NICE TOD :!: :!: :lol: :lol:
bigkahun74
06-26-2010, 10:09 PM
Glad to see you douches are good for something. I ask for a little advice and I get a picture of one of your heroes. Real cool! thanks for nothing.
Tod74
06-26-2010, 11:34 PM
Sorry.

I think the reason you got no useful info is because nobody HAD any useful info to give.... If I knew what you needed to do I would tell you,as would anyone else. that combo isnt something you here of every day.

I don't know of anyone who has done a Ford Engine into a Chevrolet car but I've seen many Fords with Chevrolet engines...I would think that HEADERS would be a problem... I think you will either have to get some custom headers built or make your own.Before I built the engine I would take the doghouse off and dummy a junk engine in there and see what had to be done to mount it in there.

The picture thing was just a joke because the majority of the regulars here probably run Chevrolet stuff.
fla1976
06-27-2010, 06:25 AM
Here is the only info I could find.
Sounds like a major headache.

http://www.automotiveforums.com/t975017-engine_swap_help_.html
hollowayshotrods
06-27-2010, 07:20 AM
Classic response bigkahun74 :!: Welcome to the forum man :!:
Nothing to add as info for your swap though, sorry.
Glad to see you douches are good for something. I ask for a little advice and I get a picture of one of your heroes. Real cool! thanks for nothing.
lively
06-27-2010, 03:25 PM
YOU GUYS KNEW IT WOULD HAPPEN 8) SO HERE GOES 8)

WHY NOT --THEY PUT CHEVIES IN EVERYTHING ELSE--SOOOOOOOOOOO --A FORD CAN GO OTHER PLACES AS WELL
ANY SWAP INTO ANY OTHER BRAND DOES TAKE ALOT OF FIGURING/PLANNING/CUTTING/FABBING/ AND ALOT OF HARD WORK :lol: :lol:

BEFORE YOU GUYS FORGET IT IN THOSE CHEBBYBRAINS OF YOURS-------
IT IS WHAT HOT RODDING WAS ALL ABOUT[AND I HOPE STAYS] :twisted: :shock: :lol:
LIVELY

PS--bigkahun74--DON'T BE A SMARTALLECK-PLEASE--THE CHEVYBRAIN CAN ONLY TAKE SO MUCH AT A TIME :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
TheYellaBrick
06-27-2010, 05:39 PM
How 'bout a BIG BLOCK Mopar in that Camaro ??!!! Now we're talkin' Gang !!
Hot rodding is ALL about INGENUITY , or is that ENGINEuity ......Do what YOU want, not what the 'gang' says. Think outa the box. :D :shock: :oops: :oops: :oops:
http://www.cardomain.com/ride/2986820
suicidebomb
06-28-2010, 08:17 PM
Well, if dude wanted to put any American V-8 in a smart car, I'd be all over that!!!
lively
06-28-2010, 08:52 PM
:lol: :lol: :lol: :lol: :lol:
cepx111
06-28-2010, 10:49 PM
Glad to see you douches are good for something. I ask for a little advice and I get a picture of one of your heroes. Real cool! thanks for nothing.


The name calling was un-called for, but whatever dude, you asked for it IMO.


Cudos Todd, your funny pic was spot on, still lmao! :lol:
bigkahun74
06-29-2010, 07:29 AM
Glad to see you douches are good for something. I ask for a little advice and I get a picture of one of your heroes. Real cool! thanks for nothing.


The name calling was un-called for, but whatever dude, you asked for it IMO.


Cudos Todd, your funny pic was spot on, still lmao! :lol:
The name calling might have been uncalled for in your opinion, but you are entitled to that. I was looking for info and that picture was all I got with everyone commenting on the photo. It would have upset you too if it was your first time on the site. I didn't come to start a fight and I apologize if I came off that way, all I was wanting was a little insight.
Thank you to those of you who replied with info it was helpful. The issue with the k member can be solved by getting a AFE k member with Ford motor mounts.
DirkaDirka
06-29-2010, 07:38 AM
I didnt go back to read your original post but what size are you thinking about dropping in?? I am dropping in a 460 SCJ block bored out to a 506 in my 93 Mustang. Gotta love them BBFs I tell ya.
cepx111
06-29-2010, 09:11 PM
Glad to see you douches are good for something. I ask for a little advice and I get a picture of one of your heroes. Real cool! thanks for nothing.


The name calling was un-called for, but whatever dude, you asked for it IMO.


Cudos Todd, your funny pic was spot on, still lmao! :lol:
The name calling might have been uncalled for in your opinion, but you are entitled to that. I was looking for info and that picture was all I got with everyone commenting on the photo. It would have upset you too if it was your first time on the site. I didn't come to start a fight and I apologize if I came off that way, all I was wanting was a little insight.
Thank you to those of you who replied with info it was helpful. The issue with the k member can be solved by getting a AFE k member with Ford motor mounts.
Well dude, apologies accepted and if I came off like a Richard Kranium, I apologize for that too.
Theres one thing you'll learn about any gearhead "helping" site.
You gotta come in here with thick skin, dont get you feelings hurt if you dont get help right off the bat, help will come, or maybe it already came, ay any rate, we like to chop it up here just as much as any other site, it wasnt directed at you, it was all in fun, so lighten up alittle and take these guys with a grain of salt.

As far as the "bastard" engine swap goes, a cutting torch, lots of angle iron and a good welder come to mind, no K member required.

Goodluck dude>Cp
Scooterz
06-30-2010, 02:29 PM
Well said Charles. I mean, he did ask about putting a BBF in a "88 Camaro".... lighten up dude!!! What did you expect?? You did not like the picture? That's like me being new on a Trekkie forum & asking if anyone is selling Darth-Vader dolls or something!!! LOL!!!

Let me ask you a legitimate question... WHY?? BBF's cost more to build. The 88 Chevy Camaro is nowhere close to accepting that engine. You would have enough work converting it over to a BBC... let alone a BBF!! the cross member/oil pan, possible firewall issues, suspension, trans tunnel, what transmission?? Ford too? The list goes on & so does the cost. In the end, you pay more & to get what gain???? The gain is you spent a lot of money to have a Ford motor in a Camaro. Good Luck.
TheRabbit
06-30-2010, 03:36 PM
Im just gonna be honest here. No matter how good of a job you do it's not gonna be worth what a Ford car would be worth with a Ford motor or even a Chevy motor. BBF in a Chevy is just to odd. Not even a die hard Ford guy would want it and NO CHEVY guy would buy it. Maybe, just maybe you could pass it off to a Mopar guy that doesn't know any better. :shock: LOL. JUST KIDDING , but it is the truth.
BEAST477
06-30-2010, 04:01 PM
Do you already have this BBF, is that why you want to go this route, or do you just want to be different?
maxpower671
07-01-2010, 09:20 AM
i can't think of one advantage or reason to do this.... :shock:
DirkaDirka
07-01-2010, 09:39 AM
i can't think of one advantage or reason to do this.... :shock:

Ummm cuz he wants to go fast. :P :D :lol:
lively
07-01-2010, 10:35 AM
GEEEEEEEEE- MAYBE HE JUST WANTS TO BE DIFFERENT 8) 8)
I CAN'T SEE PUTTING A REAR MOUNTED DISTRIBUTOR IN ALOT OF THINGS BUT THEN I GUESS I HAVE ULTERIOR MOTIVES :roll: :roll: :roll: :wink: :wink:
carssteve36
07-01-2010, 11:35 AM
If it makes it fast do it :D
bigkahun74
07-02-2010, 03:22 AM
i can't think of one advantage or reason to do this.... :shock:

Ummm cuz he wants to go fast. :P :D :lol:

This is true! Seems like there are a ton of people out there putting Chevy motors in mustangs. So I have a 429 laying around along with a 3rd Gen. WHY NOT?
TheYellaBrick
07-02-2010, 05:02 AM
GEEEEEEEEE- MAYBE HE JUST WANTS TO BE DIFFERENT 8) 8)
I CAN'T SEE PUTTING A REAR MOUNTED DISTRIBUTOR IN ALOT OF THINGS BUT THEN I GUESS I HAVE ULTERIOR MOTIVES :roll: :roll: :roll: :wink: :wink:

Ditto Dude !! Do what makes YOU happy !! When someone else forks over the big dough is the ONLY time you build it THEIR way .....
DirkaDirka
07-02-2010, 05:23 AM
i can't think of one advantage or reason to do this.... :shock:

Ummm cuz he wants to go fast. :P :D :lol:

This is true! Seems like there are a ton of people out there putting Chevy motors in mustangs. So I have a 429 laying around along with a 3rd Gen. WHY NOT?

Good luck in this build dude. Let us Ford guys know how it turns out. :D
bigkahun74
07-02-2010, 05:43 AM
i can't think of one advantage or reason to do this.... :shock:

Ummm cuz he wants to go fast. :P :D :lol:

This is true! Seems like there are a ton of people out there putting Chevy motors in mustangs. So I have a 429 laying around along with a 3rd Gen. WHY NOT?

Good luck in this build dude. Let us Ford guys know how it turns out. :D
Will do!
TheRabbit
07-02-2010, 10:37 AM
i can't think of one advantage or reason to do this.... :shock:

Ummm cuz he wants to go fast. :P :D :lol:

This is true! Seems like there are a ton of people out there putting Chevy motors in mustangs. So I have a 429 laying around along with a 3rd Gen. WHY NOT?

Good luck in this build dude. Let us Ford guys know how it turns out. :D
Will do!

Yep, post some pics as you go!!
Tod74
07-02-2010, 12:24 PM
i can't think of one advantage or reason to do this.... :shock:

Ummm cuz he wants to go fast. :P :D :lol:

This is true! Seems like there are a ton of people out there putting Chevy motors in mustangs. So I have a 429 laying around along with a 3rd Gen. WHY NOT?

My father used to put oldsmobile engines in everything.Fords Chevy whatever. Just to be different.I am not nearly as motivated as he was. Good luck with your project.