Powerglide going forward in reverse gear??

[shovelheadsporty]

I just finished rebuilding my glide. I put it all back in and fired up the engine, everything seems to be working great.....with the exception of when I put the car in reverse, it still goes forward. not sure what I did wrong....please help.

[slowmotion]

I broke my pg last year. It would go forward in every gear but first. They said it exploded the planetary. It was locked up tight in first like the tranny brake was on.

[shawnp]

Is this with the car on the jackstands or on the ground? Does this have a pro brake in it?

[shovelheadsporty]

Is this with the car on the jackstands or on the ground? Does this have a pro brake in it?

It is on the jackstands. I kicked it up to around 3 grand and it still goes forward. No brake in the tranny.

[shovelheadsporty]

I broke my pg last year. It would go forward in every gear but first. They said it exploded the planetary. It was locked up tight in first like the tranny brake was on.

This tranny was doing OK, just tore it completely down, freshened it, and put it back together. Took it back out last night and tore it completely back apart. Planetary is fine.

[shawnp]

My only thought without seeing it is the band is being bound up and not letting reverse fully apply or there is a seal/gasket that has tore but man, this one baffles me. Let me know what you fount when you pulled it back apart.

[shovelheadsporty]

My only thought without seeing it is the band is being bound up and not letting reverse fully apply or there is a seal/gasket that has tore but man, this one baffles me. Let me know what you fount when you pulled it back apart.

I pulled it back apart last night. It looks fine. I'm baffles too. I have "The Glidemaster" coming over tomorrow night to put it back together from scratch, then I will re-install it. Maybe it will be ok then. I'll let you know.

[johnracer]

Sounds like a reverse clutch problem to me. The band probably has enough drag to let the wheels turn forward with it on jackstands if the reverse clutch doesn't apply. I'd guess a cut seal on the reverse piston or waaaay to much clearance in the clutch pack. Are you sure it's full of fluid?
Johnny

[shovelheadsporty]

Sounds like a reverse clutch problem to me. The band probably has enough drag to let the wheels turn forward with it on jackstands if the reverse clutch doesn't apply. I'd guess a cut seal on the reverse piston or waaaay to much clearance in the clutch pack. Are you sure it's full of fluid?
Johnny

Yeah, It's full of fluid. It has brand new clutches, steels, pistons, everything in it. Just put it back together with all new stuff. I was told that if the clutches were too tight in the pack that it could cause that. They didnt seem to be too tight, but i guess we will see.

[Robstclair]

You didn't have a funny shaped piece of 5/16 steel tubing left over did you? it sounds like maybe you left out the reverse apply tube from the valve body to the case?

[shovelheadsporty]

You didn't have a funny shaped piece of 5/16 steel tubing left over did you? it sounds like maybe you left out the reverse apply tube from the valve body to the case?

I had one small tube that went from the valve body, bent at a 90 then went into the case once I re-installed the valve body, but that was the only one. is there another?

[Robstclair]

No, that is the one. The reason it came to mine is the first Glide I installed a brake on nearly went through my shop when I tested it because I left that tube out and when I tested the brake it went forward instead of holding.

[wmeabates]

That tube You're talking about is for first gear,it goes to the low band servo.Without it and the brake applyed the car should move backward.I never saw it happen but thats what I'm thinking.Bill.

[johnracer]

That tube You're talking about is for first gear,it goes to the low band servo.Without it and the brake applyed the car should move backward.I never saw it happen but thats what I'm thinking.Bill.You're correct Bill. I've never seen it either, but I'm certain that's what it'll do.....
Johnny

[shovelheadsporty]

I just finished rebuilding my glide. I put it all back in and fired up the engine, everything seems to be working great.....with the exception of when I put the car in reverse, it still goes forward. not sure what I did wrong....please help.\

Ok guys, got it figured out. Theres a gasket that came with my rebuild kit that goes on the rear pump........it doesnt go there!!! It blocked the fluid and was not letting the reverse engage. Goes back ward good now. Thanks for all the help!!