View Full Version : What balancer to use on sbc?
purplemonte
03-07-2010, 07:36 AM
Currently have a 8 inch competition Products balancer on my 355. Want to upgrade to a sfi rated balancer. Is there any benifits to running a smaller balancer? If I go smaller is there anything else i need to change?
Tod74
03-07-2010, 08:32 AM
ATI
TS1955
03-07-2010, 11:49 AM
I've used ATI and Fluidamper. Both seem to do a good job.
TS1955
cncmotorsports
03-07-2010, 02:14 PM
ATI if you want the best, TCI for a strong number 2, and Pro Race for a good number 3..
All depends on how much you want to spend.
purplemonte
03-07-2010, 02:22 PM
should i stay with the 8 inch one?
markdunlap
03-07-2010, 05:39 PM
8" is better for your bearings and rotating assembly. 6 1/4" is better for performance. Take you pick or call ATI and get their advise.
JEFF69Z28
03-08-2010, 02:06 AM
ATI X10
JimmySmith
03-08-2010, 06:29 PM
ATI, Later J.Smith 4621 racing
jmarksdragster
03-09-2010, 10:56 AM
ATI and stay big, controlling harmonics will benefit you better than trying to lose what little rotating weight you will change with the smaller balancer.
jaxsmith
03-10-2010, 05:51 AM
ATI and stay big, controlling harmonics will benefit you better than trying to lose what little rotating weight you will change with the smaller balancer
Very often overlooked issue jmark. ATI 8" without a doubt.