View Full Version : 427 SBC With New AFR 235 Heads
cncmotorsports
03-04-2010, 06:18 PM
Just wanted to share with everybody what you can expect with the new AFR 235 Eliminator heads. These are some great heads, Compression is a must.
Do not use them on anything smaller or with less compression or you will be very unhappy.
759.4 Horsepower and 613.2 Torque
Check out the dyno video
http://www.youtube.com/watch?v=cIkLctL1S0A
TheEngineer
03-04-2010, 07:29 PM
Everything I've heard (from many people) the new AFR 235 Eliminator heads are probably the best 23 degree heads available.
I ended-up going with the Dart Pro-1 230s on my new 427, but I did consider the AFR 235s. I ended-up and bought the Pro-1s bare and build them up myself (saved a few bucks).
I'm probably making around 700 HP and have about as much HP as I can handle at the moment in my 2300 pound car. LOL!!!
Warren
TheEngineer
03-05-2010, 04:38 AM
I forgot to mention, when I was at the SEMA Show last year I stopped by the AFR booth and looked over the 235 Eliminator heads. Those heads looked better than most of the Show-Girls I saw in Las Vegas!!! What I noticed mostly, was how straight the intake runners were. Also, the CNC porting was a work-of-art!
Warren