Turbo 400 transbrake solenoid question, please look

[robertstell]

Can I pull off the brake solenoid from the trans without haveng to do anything else, Its a turbo 400 or is there some internal peices connected that need to come apart as well. I dont know if there is just a seal, oring or whatever that may keep me from doing this...im trying to find out why my new trans is not staying locked when I get on the trnsbrake button...thanks alot, Rob

[shawnp]

Yes, the transbrake solenoid can be taken off and tested to make sure it is activating properly. Can you hear the solenoid activating?

[robertstell]

Yes I can hear the solenoid working and have had the wife get in the car so I could actually watch the solenoid work, I did pull the solenoid out and made sure the valve didnt have any burrs, made sure I had good ground and even made sure there was no voltage drop at the solenoid with everything running, pumps, fuel, fans etc...