Its official........

[DirkaDirka]

Ok guys I have been kinda looking round for a car to go down the strip with. Now I am getting one. It is a 1993 Mustang GT. I will be dropping in a BBF 460. I got some of the parts already saved so I can get them when I have the money. I am kinda confused and lost on what parts to go with for................

What valves to put in it....it will have a solid rooler cam in it.
what oilpan
I was thinking putting on a Hogans intake but not sure.
What brand radiator to go with also.

I have been talking to a couple of the guys on here already bout it and so I am just trying to get soem more input on everything.

Thanks guys for the help.

[DirkaDirka]

I forgot to add...

What brand of headers will good to put on it also?

[OneBadGMC]

Valves: Ferrea

Intake: Jon Kaase - http://www.jonkaaseracingengines.com/products/intakes.html

Oil Pan: Whatever will fit that has a pass side kickout and full length windage tray.

Headers: ???

Radiator: ??? I run a Griffin, but I hear the radiator I bought in 92 is no longer the same quality unit they now make. Supposedly they are now quite a bit 'cheaper' in construction.

[Harbone]

are you installing a new K-member when you put the 460 in? I have Kooks headers on my 91 with a crate 46o, expensive but they fit great. If you get a new K-member its a lot easier to find a pan. I have a Be Cool radiator with a pusher and a puller fan setup. heat is your biggest enemy on the Fox bodies with big blocks...

[DirkaDirka]

I know I will prolly have to do some adjusting to the crossmember and all that due ot the ract it had a 351 in it. I cant tell you for sure if I will be putting in a new one without looking at it and just setting the motor in it to see everything that will need to be done to it.

[DirkaDirka]

Here are a few pics of the car..........

http://i687.photobucket.com/albums/vv237/DirkaDirka2009/Backend.jpg
http://i687.photobucket.com/albums/vv237/DirkaDirka2009/InsideStang.jpg
http://i687.photobucket.com/albums/vv237/DirkaDirka2009/Outsidebeforerearendinstall-1.jpg
http://i687.photobucket.com/albums/vv237/DirkaDirka2009/frontviewish.jpg
http://i687.photobucket.com/albums/vv237/DirkaDirka2009/rearendwithwheeliebars.jpg

[Harbone]

I cant tell from the pics but does it still have the stock crossmember? My setup is a QA1, one tube under the motor and lots of room.
http://i330.photobucket.com/albums/l434/harbone66/th_175_7560.jpg

[DirkaDirka]

Here is what the ad says that the body has.......

The Body
First, this car is a 1993 mustang GT.
The car has all brand new glass all the way around it.
mercadize green paint.
it has a tubular K member, tubular A arms.
Weld drag light front skinny 4.5" with new tires.
Custom dash with a complete set of AUTOMETER phantom gauges
The car as a ford 9’’ rear end with a 4 link suspension
Car has drag racing coilovers all the way around it
Has a 12 gallons fuel cell with foam.
The rear end has 4:22 scalloped gears with a 31 spline spool
The rear axels are MOSER axels
Have a complete drag racing seat with 5.0 harness
The rear tires are weld drag lights with brand new slicks that have not even touched the pavement.

[Harbone]

you are set since it already has the crossmember!

[bowtie4542001]

Your new car is looking good. Keep us informed on the progress.
Chris

[Scooterz]

Dirk Diggler,

Nice ride brutha. I like the green. Remember it should say "Boogie Nights" on the side when it is done. Then on the driver's door: "Dirk Diggler" AKA Boogie man. She should run some good times... I am thinking 10's?? Cool Car. Scoot

[gungho]

I'm not sure,but I dont think that cardboard interior will pass tech........

[OneBadGMC]

After some of the things I've seen pass tech, I'm sure he can sneak it through.

[cepx111]

I'm not sure,but I dont think that cardboard interior will pass tech........
I'm thinking some silver paint and he's set.

[DirkaDirka]

Here one of the pics I just got of the engine compartment. I am waiting for more pics of the exterior and interior.

http://i687.photobucket.com/albums/vv237/DirkaDirka2009/DSCI0008.jpg

[blowninjected540]

Man is that clean 111

[bluegrassjh]

THAT COLOR IS AWESOME!

[TheYellaBrick]

Love that color !!! :D :D :D

[DirkaDirka]

I think it is the PERFECT color for Boogie Nights. And yes I will be putting that one the car. One on the windshield and on the license plate.

[DirkaDirka]

Here are a few more pics of Boogie Nights......

http://i687.photobucket.com/albums/vv237/DirkaDirka2009/IMG_0534.jpg
http://i687.photobucket.com/albums/vv237/DirkaDirka2009/DSCI00034.jpg
http://i687.photobucket.com/albums/vv237/DirkaDirka2009/DSCI00042.jpg
http://i687.photobucket.com/albums/vv237/DirkaDirka2009/DSCI0010.jpg
http://i687.photobucket.com/albums/vv237/DirkaDirka2009/DSCI0033.jpg

Sorry bout them being soo big. I cant figure out how to resize them yet.