thompsonjoedeals
07-16-2009, 02:44 PM
'69 Camaro Mono leaf rear with Multi Leaf springs
Will it work and what modifications will be needed?
Thank you
johnracer
07-16-2009, 03:46 PM
Should bolt right up. As I recall, the spring perches on the early Camaro's weren't flat. They were cupped around the sides of the spring. I'm pretty sure the multileaf perches were deeper, so you may need to use u-bolts on both sides instead of the t-bolts that were stock on the front side of the axle. Also the rear shocks are longer with the multileaf setup.....
oldandtired
07-17-2009, 06:36 AM
The rubber pad that goes between the spring and perch are different. You will have to modify them with a razorblade.
Dave