View Full Version : crank throw
rhiasdaddy
05-25-2009, 08:35 AM
how do u meassure the throw on a crank ?
wrightway
05-25-2009, 11:11 AM
ummm :?:
MEMRACING62
05-25-2009, 04:15 PM
THEY HAVE TO DO SOMETHING ABOUT THE CUSS WORD FILTER, LOOKS LIKE ANYTHING WITH A@ DOUBLE S GETS BLOCKED.
THERATTLER
05-25-2009, 04:28 PM
I think he wants to know how to measure the throw of a crank,,I DUNNO!!myself I can't throw one very far :lol:
Tod74
05-25-2009, 04:33 PM
Bass
Basshole
ASSUME
BAssmuncher
assortment
Tod74
05-25-2009, 04:39 PM
I believe the original poster was asking how to measure the stroke of a crankshaft....like for example if you were buying one used and wanted to make sure it was what it was said to be.
MEMRACING62
05-25-2009, 05:08 PM
A WORD LIKE A$$E$$ GETS BLOCKED
lively
05-25-2009, 05:22 PM
YES-----LOOK AT MY PROFILE WORDS ABOVE MY PICTURES--G$SSER IS GONE-----SOMEBODY NEEDS TO FIX THAT PROBLEM BEFORE IT UPSETS ALOT OF OTHER PEOPLE WHO ARE TRYING TO WRITE G$SSER
it did me for sure-get real rj and put someone on the program that can fix it :roll: :roll: :roll:
MY 2 CENTS WORTH
LIVELY
Tod74
05-25-2009, 10:34 PM
ass
asses
gasser
you can easily get around the filter...just a little anoying is all.
txhunter69
05-26-2009, 09:08 AM
i aint never had a problem with it and on bowhays post about hp the word ass was thrown around alot haha
txhunter69
05-26-2009, 09:08 AM
son of a bitch it got me this time
THERATTLER
05-26-2009, 09:35 AM
THATS WHAT I DON'T UNDERSTAND , YOU CAN DROP THE F BOMB AND EVERYTHING ELSE ALL DAY LONG , BUT YOU CAN'T SAY A$$ :?: DID RHIASDADDY EVER FIND OUT HOW FAR HE CAN THROW A CRANK :?: :?: THEMS HEAVY SUCKERS :lol: :lol:
Tod74
05-26-2009, 10:12 AM
THATS WHAT I DON'T UNDERSTAND , YOU CAN DROP THE F BOMB AND EVERYTHING ELSE ALL DAY LONG , BUT YOU CAN'T SAY A$$ :?: DID RHIASDADDY EVER FIND OUT HOW FAR HE CAN THROW A CRANK :?: :?: THEMS HEAVY SUCKERS :lol: :lol:
You can type ASS but it might get deleted.
ashbros
05-27-2009, 08:27 PM
what was the topic again? a$$ throwing? lol :lol:
CamBirdRacing
05-28-2009, 08:15 AM
Crank throwing. You can throw an aluminum crank farther than a steel one. Oh wait, I don't think anyone makes an aluminum crank.
suicidebomb
05-28-2009, 08:59 AM
I think if we're seriously going to throw cranks around, we're going to need to build us a trebochet. 8)A trebochet, is an engine of sorts, a siege engine.
oldandtired
05-29-2009, 02:10 PM
If my neightbor drinks too much and throws up on my crankshaft, does that count?
Dave
ashbros
06-02-2009, 10:52 AM
I think it does, but you can't just throw up on one journal. I think we are talking complete crank throw with the duration of stroke.....
FullTimeRacing
06-02-2009, 11:52 AM
My wife was pulling on my crank and it broke,so she throwed it away! :shock: :oops: :oops: :oops: :cry: :cry: :cry: :cry: :cry:
Tod74
06-02-2009, 06:40 PM
Seriously though...I have wondered myself how to go about measuring the stroke on a crankshaft...I know what to measure but how would you do it accurately?
kwkracing
06-02-2009, 07:32 PM
stick it in the engine block and measure bdc and tdc from the deck = stroke, that is if you dont have any other tools for checking...
CamBirdRacing
06-03-2009, 03:26 AM
goodson sells a stroke checking tool.
Tod74
06-03-2009, 10:46 AM
stick it in the engine block and measure bdc and tdc from the deck = stroke, that is if you dont have any other tools for checking...
I know that...I was refering to a crank standing in the floor....measuring from the center of the main to the center of the rod.
FullTimeRacing
06-03-2009, 11:25 AM
dose aftermarket cranks have part #'s on them :?: :idea:
oldandtired
06-03-2009, 03:24 PM
dose aftermarket cranks have part #'s on them :?: :idea:
Any quality aftermarket crank has all the data on the #1 throw. The cast iron or cast steel may or may not have an indicator.
Buyer beware, check the throw and the material it's made from.