PDA

View Full Version : honda


duckhunter
05-11-2009, 01:08 PM
i have a Honda prelude i run in a 4cylinder class it has a 1.8 dule carb moter how do i get rid of the hi rpm miss

Tod74
05-11-2009, 01:12 PM
i have a Honda prelude i run in a 4cylinder class it has a 1.8 dule carb moter how do i get rid of the hi rpm miss

Find out what is causing it and repair it. That should get rid of it.


JK

Welcome to the board...I don't know anything about HONDAS but even so you will need to provide more info on the entire combination...too many things can cause a miss. Could be fuel or ignition.....valve springs...many things.

TopspeedLowet
05-11-2009, 01:14 PM
I was thinking the stereo may need a new amp with a set of 16" speakers in the rear. 8)

MEMRACING62
05-11-2009, 01:23 PM
replace exaust tip with a chrome one, that should fix it :idea: :idea: :P

TS1955
05-11-2009, 01:26 PM
You guys are too funny!

TS1955

fla1976
05-11-2009, 01:49 PM
What RPM are you talking about? At the end of the run or at the shift point in every gear? What fuel pressure are you showing? Stock ignition? After market cam and springs? Stock valve train? Header? Type of fuel? There are a lot of possible causes and a lot more info needed.

Tod74
05-11-2009, 04:34 PM
replace exaust tip with a chrome one, that should fix it :idea: :idea: :P

Fart Can

MEMRACING62
05-11-2009, 05:27 PM
x2, :lol: :lol: :lol:

bbchevy
05-11-2009, 05:47 PM
I Got this1 Guys!
I seen this in a earlier Post!!
NGK or Nippondenso SparkPlugs,He said thats why the Imports run so G@@D,and get such GREAT MPG!!!!
Later
G 8)

FullTimeRacing
05-11-2009, 05:51 PM
See that,Y'all scared another one away. :lol: :lol: :lol: :lol: :lol: :roll: :roll: :roll: :roll: :roll: :roll:

FullTimeRacing
05-11-2009, 05:54 PM
Wait Wait,Try Importcrap.com's forum they will help you :wink: :wink:

THERATTLER
05-11-2009, 06:43 PM
PUT A BLOWN SMALL BLOCK CHEVY ENGINE IN IT AND IT WILL CLEAR RIGHT UP :lol:

tcarda
05-11-2009, 06:44 PM
Sounds like its running a little lean on the rice.....JK. Welcome! :D

Drtmod5
05-11-2009, 07:01 PM
You need about a gallon of this should cure it!!!!

http://www.youtube.com/watch?v=cY1YndLmbXQ

mopar1968
05-11-2009, 07:37 PM
Now come on guy's , what he need's is to put about a 400 shot on it, sounds lean to me :!: :!:



''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312

rhiasdaddy
05-14-2009, 05:31 AM
it sounds like he just needs to junk it and start over with a chevy product

MEMRACING62
05-14-2009, 06:33 AM
have caterpillar 977 that would fix the problem in no time!! :shock: :P

mopar1968
05-14-2009, 10:51 AM
CHEBBY? :shock: :shock: No go with a ''MOPAR'' :!: :!:



''JUST MY TWO CENT'S WORTH''

MEMRACING62
05-14-2009, 01:24 PM
k car? caravan? nopar nocar? :P :P

mopar1968
05-14-2009, 02:48 PM
It doesn't really matter what kind of ''MOPAR'' I know and most here know's, they will rip that bowtie right off, before the ''CHEBBIES'' drop's all their part's on the track :!: :!: :lol: :lol:


''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312