chevy in mopar

[justin45]

im going to put a 350 small block in a 1975 plymouth scamp tell me what yall think

[mopar1968]

No No put a small block mopar in it, check out my profile :!: :!:



''JUST MY TWO CENT'S WORTH''


http://www.racingjunk.com/profile/163312

[csm62]

yea but im a chevy man and the mopar body is cheap and i dont have to much cash to work with haha right now the car is uglier than dirt but its a work in progress

[mopar1968]

Oh well to each his own i guess. It's your car, If you are going to do it why ask :?: :?:



''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312

[cepx111]

im going to put a 350 small block in a 1975 plymouth scamp tell me what yall think
I'd find a chevy body or go with a slopar motor.

If you do choose to go with a chevy motor, goodluck, I'm sure it will be like putting a square peg in a round hole but then a again if you like doing lots of fab work, you've got the right project.

JMO> Cp

[Tod74]

Oh well to each his own i guess. It's your car, If you are going to do it why ask :?: :?:



''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312

You say that...but I bet you are breaking out in hives JUST thinking about a small block chevy in there...LOL

[CamBirdRacing]

I race with a guy that has a 440 Mopar in a 64 Ford truck.

[Harbone]

if you are on a budget then find a mopar motor. you will spend a lot more money and time fabricating everything from motor mounts, trans mounts, etc. trying to make the chevy fit in the crab car...
just my opinion

[blowninjected540]

If you want to go fast stick with the chevy motor. LOL :lol: :lol:

[suicidebomb]

My cousin and I put a 455 Pontiac, in a Morris Minor woodie.... go for it.
It wasn't very practicle, but it sure was fun.

[I972Nova]

I have an 84 toyota truck with a Chevy motor in it. With Front motor plates and a midplate you could put a chevy in just about anything without too much hassle. I would guess that you will need less work with the sledge hammer than I did...lol....

[mopar1968]

I am ''tod'' ripping at the seams, biting my tongue, trying to find a nerve pill :!: :!: :twisted: :twisted:



''JUST MY TWO CENT'S WORTH''

[txhunter69]

haha well i think they might actualy do it because he loves the way that scamp look but nothing runs as hard or fast as a chevy in his opinion sorry "mopar :lol: :P :!: "

[mopar1968]

No problem; You know what opinions are like? Everyone has one :!: :!:



''JUST MY TWO CENT'S WORTH''

[MEMRACING62]

toyota with chevy in it!! now i need a nerve pill, mopar got a spare :?: :P :P

[I972Nova]

A little ol Toyota motor wont spin my 33.5 x 16 hoosiers like the 360 does... :lol:

http://static.racingjunk.com/63/ui/3/41/2348481693757.jpg


We are gonna put the 700 horse 408 in it for Pinks all out at Indy to get it in the low 10's. The little 360 only runs 11.2's and I dont think that will make the show...

[CamBirdRacing]

toyota with chevy in it!! now i need a nerve pill, mopar got a spare :?: :P :P


Did you see last months,maybe the one before, Hot Rod mag? It had a 68 Camaro with a Yo motor in it.

[I972Nova]

Heres a link to a vid of that Camaro... That is pretty wild!

http://www.dpccars.com/car-videos-08/08-07-08page-2JZ-Toyota-Supra-engine-in-a-classic-Camaro.htm

[mopar1968]

Well at least it isn't a ''MOPAR '' engine in it :!: :!: :roll: :roll:



''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312

[mopar1968]

Just watched a big block ''FORD in a 81 ''CHEBBY CRAMARO'' on pass time :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: LMAO :!: :!:



''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312

[MEMRACING62]

i give a lot of credit to the guys that fit square pegs into round holes, its hard enough to make things work when there supose to work together. 8) 8)

[mopar1968]

They ask why a ''FORD'' in a ''CHEBBY'' his answer was that he wanted to go fast :!: :!: :lol: :lol:



''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312

[MEMRACING62]

HA, BUT HE DIDN'T SAY MOPAR :cry: :cry: :P

[mopar1968]

Nope he didn't probably couldn't handle that kind of power :!: Starting out slowly :!:



''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312

[MEMRACING62]

FOR STARTING OUT SLOWLY , FORD WOULD FIT THE BILL :!: :roll:

[TS1955]

A friend of mine has a Plymouth Arrow with a 468 BBC & a plate on the back that says: "This Plymouth Has A Heartbeat".

TS1955

[suicidebomb]

A friend of mine has a Plymouth Arrow with a 468 BBC & a plate on the back that says: "This Plymouth Has A Heartbeat".

TS1955

Man, I'll bet that's a rowdy son-of-a-gun? :lol:

[chrisr]

Those mopar guys don't want a chevy engine in a mopar because when it blows them away and everyone asks whats in it and they say a chevy, they will be like "oh so thats why it is so fast" :lol: :lol:
Actually I like anything fast, I just wanted to take a stab at mopar1968 8)

[blowninjected540]

Don't get mopar1968 all wound up he just got over having a heart attack, Mark got those nerve pills handy ??? :lol: :lol:

[mopar1968]

Yes and nitro also :!: :!:


''JUST MY TWO CENT'S WORTH''

[dparker]

All I got to say is, when top fuel needs the most HP possible what engine do they choose?
Sorry, but Mopar is at the top of the food chain...........

[mopar1968]

You got to have something good to put them chebby engines into to make them look good :!: :!:


'' JUST MY TWO CENT'S WORTH''

[kw89425]

All I got to say is, when top fuel needs the most HP possible what engine do they choose?
Sorry, but Mopar is at the top of the food chain...........

thats not really a mopar i cant recall the hemi ever having that much cubes. i bet nothing from a 426 would bolt to one of those blocks :wink:

[dparker]

Not much Chevy oem on a 565 either, and not very many people running a stock displacement BBC 454. Big Daddy ran a Hemi Mopar with as many Mopar parts as a lot of superpro racers have Chevy parts now. Hemi is still all that and a bag of chips.......sorry.

[dparker]

Oh wow!!!!!!!!!!! My 600 post now I'm a full fledged racing junkie..lol. :lol:

[mopar1968]

I do believe the top fuel hemi's are based on the 426, today's top fuel hemi is still the same design as the 426, Can anyone tell us what the correct cubic inches is for a top fuel hemi :?: I know the answer :!: A friend of mine has a old top fuel car in his garage, complete car :!: No cheating now on the answer :!: Parts on today's top fuel hemi is still interchangeable :!: If you can afford them :!: :!: :)

''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312

[fla1976]

I'll take a guess, 499 cid.
I think 500 is the max and they would want to be safe from a disqualification.

[kw89425]

ok i dont see the original bag of chips being able to make 5000 hp or whatever they are making now. didnt they sell the rights of the 426 and somebody else made the hemi bad? :lol:

[mopar1968]

No they did not sell the right's, dodge is coming out with a 426 next year in the challenger,Keith black got permission from chrysler in 1967 to clone the engine, he then started making alunium blocks, made them stronger to make HP , other engine builders followed keith black in this process! So what is the correct cubic inches for todays hemi in a top fuel :?: :?: The most HP from a orginal 426 was around 2500 with blower,Don garlits in swamp rat 3 was pushing almost 3000 in factory block :!: :!:


''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312

[suicidebomb]

Guess: 500 cu. in. :?: :?:

[dparker]

I'm not a Mopar guy, but the Hemi is the engine that put dragracing on the map. Mopar1968, dragracing needs Mopar guys that love Mopars and that know the history of the Hemi, to help future dragracers understand why we're where we are at. Chevy has always been the most ran car, engine, etc.. Thats why is so cool that Mopar's Hemi has dominated so long. I run Chevy, but I love the Hemi because its made the sport I love what it is today. Thank God for the Hemi, Big Daddy, John Force and anything or anyone else that has made dragracing what it is today. JMO. :wink: :wink:

[kw89425]

i bet that now chances are slim we will see a 426 in anything new. who is taking them over fiat?

[mopar1968]

Nope they are merging in order to bring fiat back to the USA, we have ordered a 426 challenger at the dealership where i work, they say it will be here in three weeks, Yes i have to agree the hemi did alot for the sport, but let's not forget the Ford thunderbolts, 390, 428,429 chebby 409,427,327 ponatic 389,421, way too many to mention, GIVE CREDIT WHERE IT'S DUE, TOO ALL OF THEM NOT JUST THE HEMI :!: :!: :!:

''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312

[justin45]

get on ur profile if ur gonna talk about putting a chevy in a scamp clay!!!!!!!!!

[mopar1968]

**WHAT** :? :? :?



''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312

[MEMRACING62]

????? :shock: :shock:

[txhunter69]

justin didn't post the original post it was our other friens clay or csm i think mot sure of the screen name but ya clay is the one with the scamp that ha wants to put a chevy motor in not justin

[mopar1968]

Okaaaay and :?: :?:



''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312

[txhunter69]

you asked what justin was saying and i was explaining

[Tod74]

I think he is saying that a dude named Clay is putting the chevy in a Mopar...BUT instead of logging into his own account to start this thread...he logged into Justin45's account...then Justin45 got on here and told him to stay the hell off his screen name and get on his own if he was gona talk about putting a chevy in a Mopar.

[mopar1968]

OOOOHHHHH ok :!: :!:



''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312