ashbros
02-02-2009, 04:39 PM
:?: Never delt with this guy and he does not have a race space profile.
Let me know. :?: Looking for good guys to deal with.
Thanks, ashbros
Check out some of the replies:
From: alan2387 To: ashbros Date: 2009-02-02 19:43:39
Subject: Re: MOTOR
Re: Ad #1451811 - GM CHEVY BOWTIE BLOCK 9.800 DECK 4.530 BORE
I WANT KNOW THE COMPRESSION, IS FOR MY PRO STREET CAR, AND I WANT RUN WITH PUMP GAS, OR AIR PLAIN GAS,
IF YOU HAVE NUMBER OF PISTON AND CC COMBUSTION CHAMBER TO YOU HEAD, I CAN CALCULATE.
On [2009-02-01 22:18:27] ashbros wrote:
>
> 4340 it is marked as such
> On [2009-02-01 21:39:40] alan2387 wrote:
> > I WANT MAKE SURE
> > is 4340 steel crank made by GM is not 5140
> >
> >
> > On [2009-02-01 21:21:19] ashbros wrote:
> > > Engine Displacement is 515
> > >
> > > GM Steel Crank 4340 4.000 stroke Externally balanced motor
> > > Eagle H-Beam Rods 6.385
> > > SRP flat top pistons 4.530 bore
> > > Piston and Cylinder bore is clearanced per piston specs
> > > There is only 4 dyno runs on the block and rotator. Engine made 851 hp on dyno with pro 1 345 6/71 blower with only 4.5 lbs boost
> > >
> > > I really do not want to sell the block. I would really like to keep it for a nice spare, but I just spent 22 grand on a new Aluminum Block, rotator and pro charger system. Just trying to get a little toy money back in my pocket.
> > >
> > >
> > > On [2009-02-01 21:12:58] alan2387 wrote:
> > > > I AM INTERESTED TO YOUR COMPLETTE SHORT BLOCK
> > > > WHAT DO YOU HAVE
> > > > CRANK: STROKE, MADE, STD,
> > > > ROD: LENGHT, MADE,
> > > > PISTON: COMPRESSION, OR NUMBER,
> > > > YOUR ROTATING FIT PERFECTLY IN YOUR BLOCK (GAP BETWEEN PISTON TO WALL)
> > > >
> > >
> >
>
Let me know. :?: Looking for good guys to deal with.
Thanks, ashbros
Check out some of the replies:
From: alan2387 To: ashbros Date: 2009-02-02 19:43:39
Subject: Re: MOTOR
Re: Ad #1451811 - GM CHEVY BOWTIE BLOCK 9.800 DECK 4.530 BORE
I WANT KNOW THE COMPRESSION, IS FOR MY PRO STREET CAR, AND I WANT RUN WITH PUMP GAS, OR AIR PLAIN GAS,
IF YOU HAVE NUMBER OF PISTON AND CC COMBUSTION CHAMBER TO YOU HEAD, I CAN CALCULATE.
On [2009-02-01 22:18:27] ashbros wrote:
>
> 4340 it is marked as such
> On [2009-02-01 21:39:40] alan2387 wrote:
> > I WANT MAKE SURE
> > is 4340 steel crank made by GM is not 5140
> >
> >
> > On [2009-02-01 21:21:19] ashbros wrote:
> > > Engine Displacement is 515
> > >
> > > GM Steel Crank 4340 4.000 stroke Externally balanced motor
> > > Eagle H-Beam Rods 6.385
> > > SRP flat top pistons 4.530 bore
> > > Piston and Cylinder bore is clearanced per piston specs
> > > There is only 4 dyno runs on the block and rotator. Engine made 851 hp on dyno with pro 1 345 6/71 blower with only 4.5 lbs boost
> > >
> > > I really do not want to sell the block. I would really like to keep it for a nice spare, but I just spent 22 grand on a new Aluminum Block, rotator and pro charger system. Just trying to get a little toy money back in my pocket.
> > >
> > >
> > > On [2009-02-01 21:12:58] alan2387 wrote:
> > > > I AM INTERESTED TO YOUR COMPLETTE SHORT BLOCK
> > > > WHAT DO YOU HAVE
> > > > CRANK: STROKE, MADE, STD,
> > > > ROD: LENGHT, MADE,
> > > > PISTON: COMPRESSION, OR NUMBER,
> > > > YOUR ROTATING FIT PERFECTLY IN YOUR BLOCK (GAP BETWEEN PISTON TO WALL)
> > > >
> > >
> >
>