CNCRacingHeads

[michael1]

Has anyone heard anything good or bad about this company.They seem a little low on price and just wondering about the quality.The ad# is 1369519.I was suppose to send them out to RFD but things happened and now I'm ready.Thanks

[michael1]

Can anyone help me on this? I'm sure someone has dealt with them. I heard he has done some pro stock cars. Please let me know anything. Thanks

[Tod74]

MAYBE ASK OVER ON SPEEDTALK....a lot of engine guys over there. just a thought.

[topsportsman1]

http://www.racingjunk.com/post/1369519/DART-BIG-CHIEF-HEADS-CNC-PORTING-520-CFM.html

I've never heard of this outfit,but thats not sayin they aren't a legit company either.

I got a question,if you was going to use RFD why are you not using RFD (Curtis) now? I am sure Curtis has alot of experiance with these heads you got.

Also why not support the people that support us here at RJ? Curtis is here in the forum ,in the engine section,and we all know he is for real,why go else where?
I am sure he has done work here for quite a few folks,and have never heard a bad word about Curtis,(RFD)

[michael1]

I spoke with him the other day and he said he had some of RFD's heads in there that he worked on and he is also about $600 cheaper.He also does the port work for Steve Schmidt. He also pays the shipping back to the customer one way which helps out.

[michael1]

I did some research on this company and found out he does excellent work. I spoke with Steve Schmidt Racing Engines and they said he does the "Pro Stock Heads" for them. I also found out that he does the head work for Pro Stock Driver "Greg Stanfield". If he is good enough for them, then he is definitely getting my Brodix Heads. His name is Ted and he is a super nice guy. If you are looking for quality work for a good price you need to give him a call. The name of his company is CNCRacingHeads and his ph# is 708-755-2000.

[shawnp]

These would not be the same heads you asked me about shipping up here to my guy in Ohio, are they?

[michael1]

shawnp, your guy already has the heads but we decided to get them cnc ported to save on all the labor that needs to be done. Your guy is definitely building the motor. I have been in touch with Murray and he is taking care of everything on that end. I appreciate your help. Thanks

[michael1]

http://www.racingjunk.com/post/1369519/DART-BIG-CHIEF-HEADS-CNC-PORTING-520-CFM.html

I've never heard of this outfit,but thats not sayin they aren't a legit company either.

I got a question,if you was going to use RFD why are you not using RFD (Curtis) now? I am sure Curtis has alot of experiance with these heads you got.

Also why not support the people that support us here at RJ? Curtis is here in the forum ,in the engine section,and we all know he is for real,why go else where?
I am sure he has done work here for quite a few folks,and have never heard a bad word about Curtis,(RFD)Ok Tom, It looks like the guy at www.cncrh.com also known as (TK Racing) did a number on my heads. :cry: :cry: I spoke with Curtis and as soon as I get this straightened up I will be getting a set done by him. I should have used Curtis in the first place. Please don't bash me, it was a very expensive lesson learned.

[hammertime]

These would not be the same heads you asked me about shipping up here to my guy in Ohio, are they?

Pink is this cnc head place the sameone shooter had all the issues with, that was a big topic on drr ? he was in indiana ?

[shawnp]

Yes, I believe you are correct on that. Shooter had major issues with the Indiana group. Michael had asked me about Ronnie V back then who I recommended and still recommend to anyone.

[michael1]

Yes, I believe you are correct on that. Shooter had major issues with the Indiana group. Michael had asked me about Ronnie V back then who I recommended and still recommend to anyone.Shawn, this guy is out of Illinois

[hammertime]

Yes, I believe you are correct on that. Shooter had major issues with the Indiana group. Michael had asked me about Ronnie V back then who I recommended and still recommend to anyone.

Ronnie is a good guy, cant go wrong with him


I will do a search on drr about shooters deal

[hammertime]

my mistake that was

CFM-competition cylinder heads (317) 627-4186

that stuck it to Shooter

[michael1]

--------------------------------------------------------------------------------

Ok guys, Ted called me and we talked about what we could do. We have found that it something with the heads and not with the cnc program. We have come to an agreement on how this can be taken care of. I will let you know how things go as they progress. He is definitely standing behind his work. :D :D :D