looking for old style edelbrock intake.

[chugger]

I AM LOOKING FOR A USEABLE EDELBROCK TOURQER INTAKE WITH THE OIL FILL TUBE IN THE FRONT. ANY HELP IS WELCOMED.

THANKS.

[cepx111]

Have you checked Ebay?
They have tons of deals on used performance parts.
Check often too.
Goodluck ,Cp

[poncholvr]

for what?
i have one for chevy ,oil doesn't go in the intake,can you specify please?

[Tod74]

for what?
i have one for chevy ,oil doesn't go in the intake,can you specify please?

old ones did.

[poncholvr]

why would there be a oil fill tube in a intake?

[jmarksdragster]

Older 283's and 327's had an oil fill tube with a breather at the front of the intake, none in the valve covers. If you were in Florida there is a big swap meet this weekend in Daytona.
http://www.turkeyrun.com/Turkey_Run_Home.html

[Tod74]

why would there be a oil fill tube in a intake?

So you can fill it with oil...

[suicidebomb]

why would there be a oil fill tube in a intake?

So you can fill it with oil...

Yepper, and don't open your beer can with your oil can opener, makes you beer taste funny....

[ARUSSELL]

why would there be a oil fill tube in a intake?

So you can fill it with oil...

Yepper, and don't open your beer can with your oil can opener, makes you beer taste funny....

X2

[jmarksdragster]

why would there be a oil fill tube in a intake?

So you can fill it with oil...

Yepper, and don't open your beer can with your oil can opener, makes you beer taste funny....

Depends on the beer, it may taste better.... :lol:

[suicidebomb]

Schlitz, The beer that made Mel Famey walk us.

[Tod74]

I would rather drink oil than P.B.R.

[poncholvr]

why would there be a oil fill tube in a intake?

So you can fill it with oil...

well i know you would fill a oil fill (with oil) but why is there a oil fill in the intakes when water goes through them?
what year we talking?


a oil tube through the intake to fill the block with??

[Tod74]

It's just a hole. The oil dumps into the lifter valley.

[cepx111]

Think about it poncholvr, it's not complitarded, like everybody said, the oil drains "THROUGH" the intake into the lifter valley, not "IN" the intake, GEZZZ

[poncholvr]

It's just a hole. The oil dumps into the lifter valley.

thanks for explaining man 8)

[poncholvr]

Think about it poncholvr, it's not complitarded, like everybody said, the oil drains "THROUGH" the intake into the lifter valley, not "IN" the intake, GEZZZ

geez thanks for the rude ignorance ,i havent seen any with that
im sure there are a lot of other ppl that havent either, but heck maybe the next time you ask a honest question you can get a dick head comment as well :wink:

[poncholvr]

It's just a hole. The oil dumps into the lifter valley.
are they a big production thing?

as i dont think they are needed,
and pointiacs have a vally pan ,and wasnt thinkin about the others just was curious

[Tod74]

It's just a hole. The oil dumps into the lifter valley.
are they a big production thing?

as i dont think they are needed,
and pointiacs have a vally pan ,and wasnt thinkin about the others just was curious

THEY HAVEN'T EVEN USED EM SINCE LIKE 1967 OR SOMEWHERE THERE ABOUTS...

[poncholvr]

It's just a hole. The oil dumps into the lifter valley.
are they a big production thing?

as i dont think they are needed,
and pointiacs have a vally pan ,and wasnt thinkin about the others just was curious

THEY HAVEN'T EVEN USED EM SINCE LIKE 1967 OR SOMEWHERE THERE ABOUTS...

i actually have a chevy engine with it on there , its a 283-327 complete
65 i believe, i couldnt remember
thats why i was mad at the crappy remark from the other guy,hell ppl need to know the right stuff
its a 2 barrel intake though factory

i was thinking it was a small ass oil hole is all thanks again for the help

[lively]

THAT IS OK ---IF YOU DO NOT ASK YOU WILL NOT ALWAYS FIND OUT THINGS :lol: :lol: :lol:

LIVELY----

[jmarksdragster]

I saw one today like new at the Daytona Turkey swap meet, owner had no business card. They are out there.

[cepx111]

Think about it poncholvr, it's not complitarded, like everybody said, the oil drains "THROUGH" the intake into the lifter valley, not "IN" the intake, GEZZZ

geez thanks for the rude ignorance ,i havent seen any with that
im sure there are a lot of other ppl that havent either, but heck maybe the next time you ask a honest question you can get a dick head comment as well :wink:

Poncholvr, I didn't mean to come that way, sometimes I can be sarcastic, sorry about that.
Perhaps I should of left off the complitarded & GEZZZZ...
I'll get it back someday.
Please accept my humble apology.

Later, Cp

[poncholvr]

Think about it poncholvr, it's not complitarded, like everybody said, the oil drains "THROUGH" the intake into the lifter valley, not "IN" the intake, GEZZZ

geez thanks for the rude ignorance ,i havent seen any with that
im sure there are a lot of other ppl that havent either, but heck maybe the next time you ask a honest question you can get a dick head comment as well :wink:

Poncholvr, I didn't mean to come that way, sometimes I can be sarcastic, sorry about that.
Perhaps I should of left off the complitarded & GEZZZZ...
I'll get it back someday.
Please accept my humble apology.

Later, Cp



WELL THANKS MAN I HAVE BEEN THROUGH SOOOO MUCH I CANT REMEMBER A LOT OF THINGS SOMETIMES, I THOUGH YOU WERE ACTING,LIKE SOME OF THE PEOPLE THAT ARE SO DECIEVED IN LIFE- I AM GRATEFUL FOR THE APOLOGY ,AND THANKS
I HAVE BEEN IGNORANT AND RUDE AS WELL ,AND TRY TO CATCH MY SELF TO KEEP FROM DOING THAT BUT I DONT ALWAYS

PPL (AND MYSELF)- DONT REALIZE HOW MUCH OLDER PPL KNEW AND JUST FORGET! LOL

SO AGAIN THANKS 8)

[lively]

ponch---WHO YOU CALLING OLD---I WAS 50 ONCE--BOY THAT WAS AWHILE BACK :oops: :lol: :oops: :lol:
LIVELY

[hotrodharley]

please let's leave age out of it.very painfull subject..hell i just forgot what we was talking about. :lol:

[showtimebob]

If you look close at most of the edelbrock intakes like the torker that are still being made from back then the boss or lump where this fill tube went is still in the casting, they just dont drill out the hole anymore. You could buy one of these and have the hole machined out. The machine shop i work at has done this before. for those who are curious the early model SBC's 283-327 had the fill tube in the front of the intake with a breather on it and the pcv was in the back of the block, this is why those old corvette valvecovers you see have no holes in them.

[suicidebomb]

A lot of those old engines had no pcv valves. They had a road draft tube, I can't remember when they started using pcv valves, I think it was in the mid 60s. I suffer from CRS... :P

[poncholvr]

ponch---WHO YOU CALLING OLD---I WAS 50 ONCE--BOY THAT WAS AWHILE BACK :oops: :lol: :oops: :lol:
LIVELY

well i feel like im a couple hundred sometimes lol

[chevyart]

my buddy at the engine shop here has one for sale. if interested e-mail me for info chevy art e-mail [email protected]

[RM1]

I think I still have a old torg.intake w/oil fill . dont have the tube it was on a 327 290/300hp engine that i am trying to sell :)

[RM1]

anyone restoring a older Chevy knows that there was both postive and non postive vent systems on 283/327 and down draft engines ether way you need the tube beclause there are no fill holes in the valve covers,the breather is i under the intake. :o

[outlaw256]

i liked the oil tube easier to get the oil in.didnt have to bend over so far. now that im old that means alot.

[mopar1962]

[quote="Tod74"][quote="poncholvr"][quote=Tod74]It's just a hole.

i was thinking it was a small ass oil hole is all thanks again for the help

[twobad1]

i may have what u need

[mrtopdogg]

i have a older edelbrock tm-1 is what you need make an offer email me at [email protected]