Cam, Springs and Torque Converter. What Should Buy??

[MillerTime12]

I have a 98 Camaro with a chevrolet 383 w/ a Holley Double Pumper Carb. , Flat Top pistons with 6 in. rods and a set of 291 Heads and a 373 rear-end. This is a drag car project. I will be racing a 1/4 mile with this car.

I need some suggestions on a Cam, and springs and a Torque Converter with a good stall to match since the transmission needs rebuilding anyway. I want the best proformance possible without wasting alot of money. We are on a low budget with this car. Give me your ideas.

Thanks for the help,
Dillon Miller

[radicalz]

I have a 98 Camaro with a chevrolet 383 w/ a Holley Double Pumper Carb. , Flat Top pistons with 6 in. rods and a set of 291 Heads and a 373 rear-end. This is a drag car project. I will be racing a 1/4 mile with this car.

I need some suggestions on a Cam, and springs and a Torque Converter with a good stall to match since the transmission needs rebuilding anyway. I want the best proformance possible without wasting alot of money. We are on a low budget with this car. Give me your ideas.

Thanks for the help,
Dillon Miller

:D :D Hey Dillon....first think about how fast you want to go then we can go from there 12's 11's....?

[russ67chevelle]

YOU BOUGHT CAM ALREADY?YOU SAID ON A DIFFRENT SECTION YOU SELECTED A 3800-7200 CAM?

IF I WAS YOU ID GO WITH EITHER COMP CAMS EXTREME LINE OR VODOO CAM BY LUNATI. YOU SAID YOUR ON A BUDGET THOSE ARE MY TOP 2!!!'