Roller lifters

[demented]

What's everyone using for roller lifters? I am looking to get new lifters and boring my lifter bores out to fit the .904 lifters on my BBC dart block. With everything out there and all the options I can get what would you guys recommend. I have used Crower in the past but am not going with them anymore since they don't rebuild there lifters anymore. I am looking at the isky redzone lifters and am steering toward them, but is there something better? Let me know.

[thedude]

Your exactly on track, Isky Red Zone would be my choice, I have used approx. 30 sets of the Red Zone pressure fed rollers in 622, 638, 706cid - max effort applications. Getting very good cycle duty from these with zero failure. I also used Crower for years and had some issues with them, since going to the Isky Red Zone, I won't go another way. Thanks.

[TheRabbit]

Hey demented.
i had over 950lbs on a set of isky's and no problems!!
I used springs and cam from comp and had 2 lifters break before changing to isky.

[BEAST477]

Yeah Isky seems to be the way to go. Lot of guys I know have had failures this year. Crower,Comp,Crane. I'm going with the Isky Red Zone EZ roll no needle bearings.

[hammertime]

http://forums.racingjunk.com/viewtopic.php?t=7382

Morel Lifters on the top of the list for me