yortls6
07-31-2008, 12:20 PM
The chassis is built as an sfi 25.2 chassis. It is certifiable to 6.00 et . It is probably 80% complete and still needs some more welding to be done.The parts are all brand new in the box. They have not even been bolted on.The rear rims are weld 15''x14'' sfi approved rims with bead locks by sheppard enterprises, the front rims are weld rims that are 15''x3'' spindle mount rims. The front spindles and coilover shocks are by Santhuff. The rear housing is a fab 9 housing that has a back brace, moly housing ends, 4 link brackets, drain and fiill bungs and has been powder coated silvervein. I still have the front fenders,doors,front bumper cover, rear bumper cover,and the dash that has been lighted and fitted. There is also the kirky aluminum seat . $11,000.
The car is in San Antonio. The front suspension still needs to be welded and installed (it is not a roller).
Pictures are here:
http://photobucket.com/1999Camaro
email - [email protected]
phone - (512)762-9292 - Sean
(512)940-1127 - Troy
The car is in San Antonio. The front suspension still needs to be welded and installed (it is not a roller).
Pictures are here:
http://photobucket.com/1999Camaro
email - [email protected]
phone - (512)762-9292 - Sean
(512)940-1127 - Troy