oil pump spring

[fishman1]

Hi guys i did a search but couldn't find anything on this, i am changing my spring in my oil pump to a high pressure one, i noticed that in the pump it only has one hole so makes it kinda tricky to get the pin out, is there any easy way to get this out or a diffrent way instead of cutting it to get it out.

thanks

[dcarr511]

take the cover off then you can remove the pin.

[fishman1]

take the cover off then you can remove the pin.

shit i have the pickup already pressed into the oil pump

[sc3314]

Just a good idea to weld the pick up onto the pump. When you change the spring. The Moroso billet pump has adjustable pressure settings for $100.00

JMT