Looking for

[hammertime]

I am needing to buy some new belts for my new motor setup, Need a Gilmer belt for fuel pump and Moroso vaccum pump.

Where can I get these at ? I have the # off my old belt on the fuel pump, 240LH12 I know what the 240 means 24" right ? what does the LH 12 mean ?

Anyone know what the belt code is for a moroso vacuum pump ?

thanks for the help

[curtisreed]

David,

240 is 24" belt. The odd thing about the number you posted is that all of my books showing timing belts, (Gilmer) lists L as 3/8 pitch and H as 1/2" pitch. The 12 might mean 1/2" width but don't know why it has L and H on the same belt. Go to mcmastercarr.com and look up timing belts, see if this number is what you are needing 6484K149.

Curtis

[suicidebomb]

Hoerr racing products, has the best prices on gilmer belts I have found.Their phone number is (866)851-7223. their web address is www.hrpworld.com. I bought 2 belts from them last year for 9.50 a piece, they probably have gone up by now.Lol

[bjuice]

I am needing to buy some new belts for my new motor setup, Need a Gilmer belt for fuel pump and Moroso vaccum pump.

Where can I get these at ? I have the # off my old belt on the fuel pump, 240LH12 I know what the 240 means 24" right ? what does the LH 12 mean ?

Anyone know what the belt code is for a moroso vacuum pump ?

thanks for the help


i had to go with a slightly longer belt for my vaccum pump on my set up ..i went to a gates belt supplier and they orderd me a few different belts.

if you goggle gates...they will give you alist of distributers in your area.

[hammertime]

David,

240 is 24" belt. The odd thing about the number you posted is that all of my books showing timing belts, (Gilmer) lists L as 3/8 pitch and H as 1/2" pitch. The 12 might mean 1/2" width but don't know why it has L and H on the same belt. Go to mcmastercarr.com and look up timing belts, see if this number is what you are needing 6484K149.

Curtis

Curtis thanks thats exactly what I needed but 24" is what I had I need a 26 which they dont carry ! darn it

[bjuice]

David,

240 is 24" belt. The odd thing about the number you posted is that all of my books showing timing belts, (Gilmer) lists L as 3/8 pitch and H as 1/2" pitch. The 12 might mean 1/2" width but don't know why it has L and H on the same belt. Go to mcmastercarr.com and look up timing belts, see if this number is what you are needing 6484K149.

Curtis

Curtis thanks thats exactly what I needed but 24" is what I had I need a 26 which they dont carry ! darn it


http://i210.photobucket.com/albums/bb117/brianmcswain/gatesbelts.jpg

[hammertime]

thanks Brian