Where Can I Find A BBC to SBC Front Adapter Motor Plate.

[dragraceme]

Where Can I Find A BBC to SBC Front Adapter Motor Plate.

Like The One In The Picture See Ad #1080656

[johnracer]

You'll probably have to get one made for you. I fabricated spacers to go between the rear of the big block tabs on the chassis and the front of a straight small block motor plate. Looked and worked fine. I can email you a pic or I'll post it here if someone can tell me how....

[dragraceme]

You can email me a pic. to [email protected]


You'll probably have to get one made for you. I fabricated spacers to go between the rear of the big block tabs on the chassis and the front of a straight small block motor plate. Looked and worked fine. I can email you a pic or I'll post it here if someone can tell me how....

[johnracer]

Email sent....

[edvancedengines]

Any sheet metal shop shoul;d be able to fab that up from scratch for you. It shouldn't be that big of a deal. Just tell them how much of a Z you need on it.

You can also buy a semi-finished SB Plate for a wider frame than you have and get the sheet metal shop to just make it to be offset like the one you want. You are just talking about 4 bends at a 45 deg angle. Then fit the rest to your car. It does look cool though.

Ed

[gnsrule]

This should set you up right:
http://www.quartermax.com/details.php?prodID=1056&catID=192

[jmarksdragster]

Tommy makes the motor plates you need, as well other stuff like trans shields.
http://www.racecarpartsdepot.com/transmission-shields.html

[Racefab57]

Suncoast racecars has em.David.