327 with aluminum heads

[west68]

wondering what a 327 with flat top pistons an 57cc aluminum head with 194 valves heads are 86 corvette heads L98 what the compression ratio would be an what would be a good head gasket to use thanks rw

[amal]

CR will be around 9.8:1 with 0.04" head gasket.

[caprice327]

http://www.wallaceracing.com/cr_test2.php

This calculator is worthless! Dont use it

[burgessdg]

Just looking at the numbers, I think you are both a litttle off. Looks to be more like 10 to 10.5-1. Here is another calculator. To be accurate you have to know the CC's of the reliefs and the Deck height. .040" is a good assumption for the gasket you should be using (standard permatorque).


Dan

http://www.wheelspin.net/calc/calc2.html

[caprice327]

http://store.summitracing.com/partdetail.asp?part=MRG%2D1052&autoview=sku

http://www.amazon.com/Permatex-80697-Gasket-Sealant-Aerosol/dp/B000HBNUDQ

With that set you can have piece of mind that youl never have to deal with a blown head gasket.

CR with above gasket is 13.31:1 with one calculator and 11:1 with the other now when I check both calculators to a factory 8.5:1 motor the calculator I posted is wrong and should be hacked off the internet.

According to the wheelspin.net calc you would be @ 11:1 with the above gasket set.

[jmarksdragster]

Fel Pro 1003.