nasty02bird
06-20-2007, 11:04 AM
Hey guys, I have laying around the garage a pair of I believe 18 degree bowtie heads, any info you can provide on these would be helpful, such as the cc's and possibly factory flow numbers. part #10134363
Andrew
gimmemud
06-20-2007, 11:26 AM
Its 1 of these not sure which one though
10134363 Bowtie, Hi port, alm, 18º, angle plug, 45cc, 210cc intake port
10134363 Bowtie, Hi port, alm., 18º, angle plug, 60cc, 215cc intake port,
10134363 Bowtie, Hi port, alm., 18º, angle plug, 50cc, 250cc intake port, CNC machined, 2.15-1.625 valves
10134363 Bowtie, Hi port, alm., 18º, angle plug, 65cc, 250cc intake port, CNC machined, 2.15-1.625 valves
10134363 Bowtie, Hi port, alm., 15º, angle plug, 36cc, 223cc intake port
cboggs
06-20-2007, 04:10 PM
Hey guys, I have laying around the garage a pair of I believe 18 degree bowtie heads, any info you can provide on these would be helpful, such as the cc's and possibly factory flow numbers. part #10134363
Andrew
Andrew,
if you can post a few photos of the ports and chambers I might
be able to tell what they are, ..
but a part number on a box would really be good.
there where a hand full of different heads with different valve spacing, .
thicker decks, etc, . ..
Curtis