trans safety

[spib]

need a flex plate shield and a tranny sheild or blanket for turbo 350, do any of you have suggestions to as brands, space is tight in s10 , but must get these two things to be legal, any good ideas

[curtisreed]

We use tha CSR fiber shield it's all in one and fits really close.

http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_44680_-1

Curtis

[spib]

http://store.summitracing.com/partdetail.asp?autofilter=1&part=HUP%2DHP9400&N=700+400306+115&autoview=sku just ordered this flexplate shield, hopefully will fit in there, will get a blanket from tci and will be done

[sc3314]

By the time you buy a shield and blanket. You can but a JW bell for about the same $$$ No worries of a blanket getting the trans hot, or coming undone. Also hard to see any leaks from the trans. Most of all no clearence problems.

[sp2816]

drz1972ss wrote:By the time you buy a shield and blanket. You can but a JW bell for about the same $$$ No worries of a blanket getting the trans hot, or coming undone. Also hard to see any leaks from the trans. Most of all no clearence problems.

The JW ultrabell is for protection of the flexplate area, but it still requires the blanket or transmission shield for the planetaries.


Bill M

[sc3314]

SFI spec 4.1 for cars running 10.99 and faster SFI spec 30.1 for 9.99 and faster. If your running any slower, no flexplate shield or blanket required.