PDA

View Full Version : Need Help Identifying This


ratechie
11-12-2019, 07:53 AM
https://scontent-dfw5-1.xx.fbcdn.net/v/t1.15752-9/73372397_2507545842663392_6916187743714279424_n.jp g?_nc_cat=108&_nc_oc=AQk426OiDH0xENtPI5X8cPKWuCneBk63e6UA0NRRnhf nOfRkr-3MAf4NHAIH1KBuVxM&_nc_ht=scontent-dfw5-1.xx&oh=43b4b34b943471cefd854a5d9139fb3b&oe=5E5A41FA (https://scontent-dfw5-1.xx.fbcdn.net/v/t1.15752-9/73372397_2507545842663392_6916187743714279424_n.jp g?_nc_cat=108&_nc_oc=AQk426OiDH0xENtPI5X8cPKWuCneBk63e6UA0NRRnhf nOfRkr-3MAf4NHAIH1KBuVxM&_nc_ht=scontent-dfw5-1.xx&oh=43b4b34b943471cefd854a5d9139fb3b&oe=5E5A41FA)https://scontent-dfw5-1.xx.fbcdn.net/v/t1.15752-9/74836799_2396240700693292_168512732620914688_n.jpg ?_nc_cat=103&_nc_oc=AQngpVj2Z8HxDQN0AMfKvJiLVL8jqtFNHgQ_RPkZ80g 943eGqvD0InQsoi8swNnXZzI&_nc_ht=scontent-dfw5-1.xx&oh=9bcbd5abdc16817aaaa6f4e595d4a2a5&oe=5E5DF6C9
A 1974 Camaro, VIN is no help and Cowl Tag if original is also no help. The only Camaro I have ever seen in my 56+ years that looks similar is the 74ish Penske IROC race Camaros. See Pics and any ideas would be great, the fenders are not body filled, or weld ons, the fender look factory. The roller tires are actaully 11.5" Slicks and they don't rub the inner at all, there is actually still about a half in on the inside. Any help, thanks

Harbone
11-13-2019, 04:29 AM
The factory never made flared fenders, the race shops made them by hand. The front of the flare looks looks it was molded from a Pontiac Trans Am wheel flare on your car
Here is a picture of the Penske car, the flare is completely different
http://assets.superchevy.com/f/157193545.jpg?width=640&height=426