IN STOCK NOW CLICK ON BUY IT NOW BUTTON TO BUY.
BUY BY 3:00 PM CST AND ITEM WILL SHIP SAME DAY M-F
QUICK FUEL 750 ANNULAR MECH BLOW THROUGH GAS DRAG RACE Q-750-BAN BLACK DIAMOND
Calibrated for blow-through applications
YOU ASK FOR IT ALL NEW BLACK DIAMOND BLOW THRU
Unique high temperature coating designed by NitroPlate® specifically for this application
Highly durable finish
Impervious to virtually all under hood chemicals and fuels
Provides 6% reduction in fuel temperature
High temperature coating technology in satin black finish
Q- Series Carburetor 750 CFM ANNULAR BLOW-THROUGH DRAG RACE GAS mech secondary- Built for the ultimate blend in performance and drive-ability. This carburetor features jet extensions and a notched float with all the tuning you features you would expect from a carburetor that's ready to race. Q-Series with it's 4-corner idle.
~ Aluminum main body, and fuel bowl with QuickSet sight windows on both sides make for easy float adjustment
~ Billet metering blocks and throttle body ensure leak and porosity-free sealing between circuits
~ Each carburetor is hand-assembled and engine tested in the USA!
Q- Series Carburetor 750 CFM ANNULAR BLOW-THROUGH DRAG RACE PART # BDQ-750-BAN
PRIMARY MAIN JET 76
SECONDARY JET 86
PRI IDLE AIR BLEED 70
HI SPEED BLEED 31
PRI NOZZLE 33
SEC NOZZLE 35
NEEDLE & SEAT 130
POWER VALVE 4.5
carb comes with base gasket, air cleaner gasket, & 1 to 1 silver link, 1 black link for 60% primary before secondary opens.
Q Series Carburetors Secondary Linkage Adjustment
Lower slot 60% primary before secondary opens.
Top slot 40% before secondary opens. This is the standard linkage position for most applications.
Using the alternate lower hole and top slot, the silver link provides a even opening ratio for both the primary and secondary throttle shafts.
YOU GET 1-QUICK FUEL GAS BDQ-750-BAN BLACK DIAMOND GAS BLOW THRU CARB & CARB COMES WITH 1 BLACK #6 FUEL LINE KIT
AND YOU GET A NEW BLOW THRU BLACK BONNET HAT.
These new carb hats are the perfect solution for any blow through installation. The Holley EFI carb hats contoured designed promotes optimal airflow, while providing excellent hood clearance for most applications with a 5-1/8" air cleaner flange. These hats feature a 1/8th NPT reference port that can be used as a convenient hookup for boost gauges or carbureted fuel pressure regulators . The inlet is designed for a 3.5" silicone coupler, with a sealing lip to ensure a leak free installation.
Hi-Flow Contour design for optimal air distribution
3.97” Tall for excellent hood clearance, 3.5" INLET
1/8 NPT Reference port for boost gauges or carbureted fuel pressure regulators
Fits all applications with a 5-1/8th” air cleaner flange, 4150 Flange Carburetors.
The air cleaner stud entry can be drilled to 5/16 for installations with larger air cleaner studs
Black Powder Coat finishes
Air cleaner gasket, stud, washer, nut and 1/8NPT plug – included