1. Peak HP 630 @ 6900 RPM peak torque is 542 @ 5400RPM.
2. 363 cu.in small block wet sump 10.16:1 comp.
3. Ford 302 race block.
4. AFR 205 heads.
5. Comp cam with roller cam bearings.
6. Calles crank nitrite.
7. T&D rockers.
8. Oliver rods.
9. BLP 830 CFM road race card.
10. Victor JR intake.
11. 304 stainless steel custom tri-Y headers.
12. Ross pistons.
13. Mech solid roller lifters.
14. Race alternator.
15. CV fuel pump.
16. Power master starter.
17. MSD dist.
18. Aviad roadrace deep oil pan.
19. C&R radiator with heat exchanger.
20. Custom breather system.
21. MSD coil and wires.
22. Ford aluminum bell housing.
23. Center force clutch with aluminum. flywheel.
1. 8 point 4130 Moly cage tig welded.
2. Door bars run inside doors.
3. Window nets / Schroth belts.
4. Lifeline 4.0L Mech suppression fire system & 1.0L hand extinguisher.
1. Jerico 4 speed top loader 1st. 2.19, 2nd 1.63, 3rd 1.27.
3. Mark Williams carbon fiber drive shaft.
4. Strange alum case with Detroit locker 31 spline and Daytona pinion support.
5. one set of PS engineering wheels 15" X 8" with used goodyear blue streaks.
6. One set of vintage wheel works wheels 15" x 8" with new good year blue streaks.
7. Full floater Ford 9" speedway rear end with 1 degree negative camber crowned axles and 11" drum brakes.
8. Front Cobra automotive disc brakes with lincoln / t bird calibers pad type 263 compound r-4.
1. Auto meter gauges, GPS speedo.
2. Repo modified ele harness.
3. NOS knobs.
4. NOS delete heater / radio plates.
5. Cobra evolution GT seats with adjustable tracks.
6. Fire system / extinguisher.
7. Window nets lt/rt.
8. Custom rear alum package tray.
9.No side windows.
11. Wipers are for looks only due to interference with roll cage.
12. CV shift handle needs to be changed it hits seat slightly in reverse.
13. Tilton brake biyis adjuster.
14. Removable steering wheel.
Factory clutch brake & gas pedal assemblies.
1. Black high end paint job no waves!!!! 3 stage.
2. Ray Dot mirrors.
3. Shields hard coat front and rear windows.
4.NOS window trim.
5. R-model quart window / valance/ hood/ hood pins.
6. Heat lights work.
7. Turn signal behind grill work.
8. NOS grill.
9. NOS tail lights brake lights work.
10. NOS door handles they work.
11. Quart panels were modified for tire clearance.
12. AMB lap rec.
13. Painted floors.
14. Fenders where modified for tire clearance.
Suspension & under carriage
1. Cobra automotive front suspension.
2. Penske shocks.
3. Suspension is completely mono balled.
4. Alum front strut rods.
5. Hallow front sway bar.
6. 304 stainless steel exhaust with 1990 NOS flowmaster
7.Upper rear 3rd link help tires from braking loose under hard acceleration and braking.
8. Watts link.
9. Fuel safe 22 gallon fuel cell.
10. NOS steering components.
11. LEE power steering modified close ratio steering box.
12. All sheet metal is original or NOS with exception of floor pan.
13. Under side of un-body chassis was complete stitch weld.