Not all Stacker trailers are created equal!
I’m selling a highly optioned 32′ Aluminum Stacker Race Trailer that I had custom built by Intech Trailers about 4 years ago. It will cost about $100K to have this exact trailer made. Features, in no particular order, include:
All aluminum construction for great weight savings and better road stability at high speeds. Previously, I had an all steel Stacker trailer the same size, but with far fewer options on 16″ G-Rated Goodyear tires. It weighed 22,500 pounds loaded and I’d average 10 blowouts a year. I had this trailer built to my very high specifications and loaded with the same cars, golf cart, tools, and far more parts & supplies — it weighs only 14,200 pounds. I barely know it’s behind my bus type motorhome.
I added 1′ increased interior height for 60’s full size cars, but still a legal 13′ 2″ — and goes under the 13.6 low bridges.
This trailer is set up for two LARGE drag cars. We load a 65 Dodge Coronet and a 60 Plymouth Station Wagon, with a golf cart having a roof – and we travel cross county with ease.
Triple 7,000 pound spread axles with high speed, H-Load rated Goodyear tires. I’ve NEVER had a flat and often travel at 75mph on Texas highways.
Optional .050 Aluminum skin thickness for a far better look over .040. It also avoids warping in extreme hot or cold weather and dents from hail.
Wrapped last year in Antique Bronze. Was previously blue.
The Roof is heavy duty braced to walk on observation.
The attic is heavy duty braced to transport a golf cart
Attic starts 6’5″ from floor for tall people to stand upright
Full width rear door goes wall to wall to make it easier to load wide cars
Aircraft cargo strips and Heavy Duty D-Rings
Floor made of Extruded Aluminum
Tongue extended 1′ for tighter turns and backing with out damage to trailer or towing vehicle
Tongue box to house jack hydraulics (instead of taking up a floor cabinet) plus two storage compartments. I have two pneumatic hydraulic jacks and an impact wrench with air for on one side and trailer’s 35 amp shore line on the other side.
Lift pump in floor compartment
Dove tail rear for easy loading of low cars and low headers. I’ve never hung a car up loading in trailer or on lift.
Spare tire mount with new H-Load Rated 17.5″ A Spare tire on front of trailer. A flat (NEVER HAD ON ON THIS TRAILER) can be quickly changed without going into the trailer.
All LED lights. Interior, Loading, Pit, Cabinet, under lift lights are bright low watt DC LEDs.
All Driving lights are LED.
There are 6 Deep Cycle batteries in floor compartment, which can power the trailer (lights, lift, jack) for better than a week in the pits and away from shore power.
Completely wired for 35 AMP shore power service that automatically powers the numerous 120V outlets and heavy duty battery charger. Circuit breaker box, battery charger and master cutoff switch in street-side upper compartment.
All aluminum lift with three removable center sections — to service the underside of the race car.
Two more in-floor spare tire compartments, one containing a new matching spare tire (never on ground) and the other supplies.
Wall fender compartments with shelving on street side.
In floor winch compartment with wired 12,000 pound electric winch. Also has a slide in pulley for loading the bottom car, while the lift has a pulley mounted to load the top car.
Full width upper/lower cabinets with stainless steel work bench and full length closet in front of the trailer.
Double side doors that open wide enough to drive a Golf-Cart in.
Slide out door step.
Puck door lock for greatest security
Wall mounted race car tire holder in attic
Wall mounted 5 jug holder in attic
Wall mounter jack pouch
Built in Tool Chest
Large door mounted cabinet with drop down table
Front & Back wall mounted strap holders with closed cell foam rubber under it to protect wall
4′ Rubbermaid wall rack to hold extension cords, blower, broom and mop
Extra long aluminum lift ramps to load low cars with headers
Extra long full length aluminum door ramp with lock downs — for loading long cars
Heavy Duty 30,000 pound safety tongue – for safe towing
Wall mounted Fire Extinguisher Holder
Inverter that converts DC to AC – I use on bench for weather station and computer. Master cutoff switch.