PRICE DROP TO $22,500, engine cost $15,000 to build 54 runs ago.
Will sell the roller for $15,000 FIRM!.
Previous owner spent well over $40,000 building this car and then passed away suddenly, LOT OF CAR HERE FOR THE $$$. 4130 t.i.g. welded cage and front frame assembly, aluminum racing struts, will cert. for new owner.
Will fit a big driver, previous owner was 6'4" 275, has LOTS of leg room!.
Buyer will have choice of AED 850 gas or alcohol carbs, have both.
TRADE VALUE HIGHER, CALL 🤙
Very high dollar build with only 50 runs total, have title for it!
- original Z28 body
-AJE complete tig welded moly front frame section with $1500 AJE aluminum struts
- rack steering
- Wilwood front and rear disc brakes
- Quarter Max complete rear frame section, adjustable ladder bars, aluminum adjustable shocks
- 9'" Ford rear, 33 spline Strange axles, 5/8 studs
- 4.56 gear with spool and aluminum pinion support
- full 4130 tig welded cage
- 427 engine, Dart little M std. block, Eagle crank and H beam rods, AFR 220 heads, custom Comp roller cam
- 1.76 glide with brake
- ARC fused switch panel
- big aluminum radiator with dual fans
- trans cooler
- Aeromotive 180 gph hi volume fuel pump
- all braided lines, fuel, trans and rad. hoses
- Mega 450 delay box, removable
- MSD digital 6 plus box
- electric shifter
- cam lock belts good till 2023
- car weighs 2600 less driver
Very versatile car, can run top/mod et, box/no box, top bulb/bottom bulb, s/st. Currently running 6.30 foot braking. Car has 50 runs from new build including engine and transmission, all new parts used, owner passed away, was a very expensive build, have lots of documentation for the engine.
Rear slicks 1 run old, bought last month.
Buyer will have choice of gas or alcohol AED 850 carbs, EGT gauge not included.
Has power windows and trunk release.
New 100 amp alternator and dual batteries
Can deliver for 1.50 a mile.
Will sell the complete roller with trans less engine and converter for $15,000 FIRM!