*** AS of June 18/20 there will be a Slight Price Increase of approx. 3.0% on All Prices mentioned in this Ad.
>> CUSTOM BUILT HD 9" FORD Rearend HOUSINGS With New Steel Housing Ends Installed & Welded on AVVAILABLE "WITHOUT" or "WITH" "NEW" HD ALLOY STEEL AXLES..Does not Include any Mounts, "BUT" as an OPTION--Can be Supplied & Installed for Extra $$
..."CHOICE" OF LENGTH of axles & "CHOICE" of 28 or 31 or 35 SPLINE HD AXLES...Housings
Housing Lengths can vary from as Short as 48" to 67"..This is OVERALL Length from Axle Flange to Flange. ..OFFERED IN "2" VERSIONS---# 1... Housings with FULLY RECONDITIONED Factory Steel Center Units with "NEW" STEEL AXLE TUBES INSTALLED & WELDED + with the BIG or Small Bearing NEW STEEL HOUSING ENDS..INSTALLED & WELDED ON-- OR VERSION # 2...Housing With ALL "NEW" EVERYTHING--Including NEW STAMPED STEEL HOUSING CENTERS with INTERNAL STRENGTHENING GUSSETS with NEW STEEL AXLE TUBES INSTALLED & WELDED & with BIG or Small BEARIN, NEW STEEL Housing ENDS, INSTALLED & WELDED
----FOR USE for Hi-Perf Street Vehicles or PRO STREET Hi-Perf BIG HP Vehicles or Full Competition Race Cars/Trucks..DRAG RACE OR CIRCLE TRACK OR PRO STREET !
>> PROMO PRICING..Housing Only
..VERSION # 1...Prices range from $309.99 up to $339.99, Depending on Overall Length of Housing
..VERSION # 2...Prices Range from $379.99 to $399.99..Depending on Overall Length of Housing.
>>> HOUSING WITH "NEW" HEAVY DUTY ALLOY STEEL AXLES..CHOICE of 28 or 31 spline (or Optional 35 Spline) & Axles will be Cut to the Length you Specify
..Promo Pricing ... of Housing with Axles
VERSION # 1..$559.99 up to $589.99, Depending on overall Length of Housing.
VERSION # 2..$629.99 up to $649.99, Depending on overall length of Housing.
..OPTIONAL AXLES--35 Spline XTRA HEAVY DUTY ALLOY STEEL
...ADD $59./Pair for 35 spl Axles
*** For anyone Wanting MOUNTS of any kind Supplied & Installed onto the Housing..INQUIRE for $$$ PRICING !
** MINIMUM OVERALL WIDTH OF REARENDS as PRICED ABOVE is 48" Axle Flange to Axle Flange or 43" housing end to end.. MAXIMUM OVERALL WIDTH is 67" axle Flange to flange or 62" housing end to end
*** FOR DRAG RACE OR PRO STEET HOUSINGS Without OR With AXLES any SHORTER than 48" Axle Flange to axle Flange or 43" Housing end to Housing end & WILL COME WITH "STRANGE" or "MOSER" ALLOY STEEL S/T or PRO DRAG RACE AXLES 28 or 31 or 33 or 35 or 40 spline..*** CALL FOR EXACT $$$ PRICE QUOTE
...WE can also have Leaf Spring Mounts/Perches Supplied & Welded on to your Specified Location specs ..ALSO Can Weld-on OTHER Brackets/Mounts for USE with Coil Over Shocks or Ladder Bars or 4 Link Bars Etc
>>>...ALSO Available with Brackets to Mount these Rears into a "A" Body GM Car with oem Coil Springs suspension etc
...WE ALSO can Sell you a COMPLETE 3rd Member Center Section FULLY ASSEMBLED....CHOICE of Cast Iron or HD NODULAR Iron or HD ALUMINUM Cases with CHOICE of Posi-Traction/Limited Slip Carriers OR Locker Carrier Units OR Spools etc..Plus almost any Gear Ratio you would want. & ALSO COMPLETE DISC BRAKE SET-UP--OR A COMPLETE REAR END with or without Brakes ..READY TO BOLT INTO YOUR VEHICLE !
*** CUSTOM RACE COMBO"S for Bracket Race/Circle Track Race or all way up to TOP SPORTSMAN RACE Vehicles with BIG HP