Pontiac Ram Air III Dragster Engine - $9,499

Contact (585) 704-3345
Pontiac Ram Air III Dragster Engine  for Sale $9,499 Pontiac Ram Air III Dragster Engine  for Sale $9,499 Pontiac Ram Air III Dragster Engine  for Sale $9,499 Pontiac Ram Air III Dragster Engine  for Sale $9,499 Pontiac Ram Air III Dragster Engine  for Sale $9,499 Pontiac Ram Air III Dragster Engine  for Sale $9,499 Pontiac Ram Air III Dragster Engine  for Sale $9,499
$9,499
Private Seller - ss70elcaminowner
Rochester, NY
Report This Ad

Item Details

Ad Number182995742
ConditionUsed

Updates From Seller

This engine was written up in bangshift this month. https://bangshift.com/bangshift1320/pontiac-power-iron-block-iron-headed-blown-ram-air-iii-engine-ran-8-0s-dragster-ooga-booga/ Above Added: Fri February 16, 2018, 8:11 am EST

Started life as a 1970 Ram Air III 400 and currently has a displacement of 462 inches. Above Added: Fri January 26, 2018, 7:55 pm EST

Description

This is the engine that was in my dragster, and ran in a 8.0 index in. We have built a new engine to run in the 7.0 Index. It was completely rebuilt from a bare block after the second race of this season and run in the remaining four races. The engine runs perfect and took me to third place overall in the ProComp class of the NDRL series.

This is a run from the last race of the season at Bowling Green at the Good Guys Heritage race. We had dialed an 8.0 in the quarter and ran an 8.029. This engine is very tune-able. https://youtu.be/XQnfcERZot4

I have developed a list of parts in the engine.

Starting from the top and working my way down.

But First.
Fuel pump was calibrated by Spud Miller of Fuel Injection Enterprises. He provided the initial Tune and that documentation is include in the sale. In addition my tune notes are also included and they are for tuning to an 8.0 index. Engine was dynoed by Engine Performance Specialties at 811 HP and had to be detuned to run 8.0 at 166 MPH. My best guess is we are running at 713 HP. See picture below.

The engine was torn down to a bare block June of this year (2017) new billet four bolt main ProLine caps, Clevite bearings, Venolia aluminum rods, Eagle forged Crankshaft were installed. The engine was line honed by Freedom Racing Engines in Brownsburg In.

Since then the engine has been in my Front Engine Dragster and took us to a Third place in overall points in the Proc Comp class of the NDRL Series. Here is a YouTube video of a pass at Bowling Green Hot Rod Reunion this year. https://youtu.be/XQnfcERZot4 In that pass we ran an 8.029 on an 8.000 index. This engine responds very well to tuning inputs.

This is a video of the extras included in this sale and shows the major parts being put back on after it was pulled from the dragster.

Ok, Bits and pieces from the top;
Enderle Bird Catcher Injection Hat with “K” Valve and Pump Saver
Spud Miller’s Needle Valve for Idle Control
Cloth braided fuel lines to fuel pump, System One Fuel Filter, Fuel Shut off Valve
Enderle 80A-1 #FIE 1030 Positive displacement fuel pump
DJ Safety Blower Restraint SFI Spec 14.2 with certification good to 3/2019
Littlefield anodized 8-71 blower with standard pitch vanes which are stripped
RudeRon Blower Spacer modified to include Blower Burst Panel
(2) Complete MSD AL6-2 boxes with RPM signal and (2) two MSD Coils
BDS Blower intake
Kauffman Heads;
74 CC, 325 CFM Port, 2.11/1.77 Valves, Titanium retainers, H-11 springs,
600 series valves.
SDP Mega Brace Lifer Bore Reinforcement System
Lifter oil restritions
Engle Cam, EP-58/EP-30 Grind, specs on Engle’s site, I have the cam card
Block is a stock (only stock part) Pontiac 1970 Ram Air III, Deck 10.240, Bore 4.155
Pistons from Venolia (one new spare piston);
4.155 Bore
.990 Pins & Spiro Locks
2.200 intake notch / 1.750 Exhaust notch
15cc Dish includes Valve Notches
10.5 Comp. for Blown Alcohol
1.605 Compression Distance
Rods from Venolia (aluminum, seven spare rods left over from rebuild)
Big Block Chevy Big End and Pin Bore
6.635 Center to Center
Milodon 13900 Timing Gear Drive (single Idler)
(2) Two Meziere front mounted water pumps (one as a spare) both modified to
conform with Meziere cooling system circulation (auxiliary plumbing deleted). See picture below

Spike custom radiator with electric fan (and a spare) and all plumbing.
(2) two blower belts with belt guard
(2) Blower pulleys
Custom Crank Hub from RCD
Blower belt Idler pulley bracket, slide adjustment and idler pulley
Set of Stainless Steel “Weed Burner” headers
Eagle forged Crankshaft part number EAG440042506700
Billet Steel main caps by Pro-Line
Clevite bearings
Oil Scraper
Milodon Oil Pan (8 quart)

Engine Cradle is included

About 20 runs on this rebuild Still looking for input on the correct price for it to sell, not what it is worth.

Payment Details

TradesNot Accepted
Accepted Payment Methods Paypal, Cash

Seller Notes

Feel free to contact me for any additional details or pictures of specific areas of interest on the engine

Message Seller

Send Message

About The Seller

PRIVATE SELLER
ss70elcaminowner
Member Since September 2009
CONTACT INFORMATION
Rochester, NY 14617
(585) 704-3345
Honor Payments
Lifetime: 0
Last 12 months: 0 Learn More
No Achievements Yet
Bronze Seller Silver Seller Gold Seller Platinum Seller Power Seller
Get Transportation Rates

Location

ROCHESTER, NY
View All Resources

Buyer Resources

Insurance
Shipping

Compare shipping quotes and save up to 80%

This item ships from 14617
Secure Transactions

Secure your transactions with Escrow.

Similar Classifieds
Copyright © 2005-2018 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy


Execution Stats: 0.132 sec / 9.0 MB used / 9.4 MB peak