BMW Custom M3 Wide Body with 383 Stroker LS2 Motor with top of the line components. Over $100,000 invested, sell for $47,000.00 and have top of the line 2017 Aluma tilt trailer if interested for extra fee.
I raced E30 and E36 M3's and wanted more power and better handling is why I created what I call the GM3. Car took several years to build and has all the best components. It is extremely fast, is a head turner and that corners great and runs with the top Porsches, Corvettes and Vipers on any track. The motor is built and could handle 1000hp with a large blower. 2700 lbs. with carbon and fiber glass body parts, wing and hood. Setup professionally. If you want a BMW that will be very difficult to beat on a road course, this is the one we call it the GM3. Built to win either sprint races, long enduros with high end cars, ie. 25 hr enduro and race in NASA Unlimited or any other unlimited class. Has a new 383 stroker setup with a new ECU and front mounted crank sensor. Custom Headers and exhaust. We are using a Holly ECU system, their system is great and easy to tune. Car sounds amazing, drives great, excellent pedal feel, with the 427 diff, it pulls hard and better on the launch and is a 180 mph top end car with the 6 speed. Does 90 mph on the dyno in 3rd and red line is 8000 rpm, but with the beefed up internals. Setup for road racing, and fast on a drag strip, but with suspension change and adjustment and even a blower for top straight line power, it could be really great on the drag strip and also some of the Nevada top speed runs.
MOTOR AND TRANSMISSION
New LS6 383 Stroker-with build sheet- too much to list, but can send build sheet. Dyno'd at 550 hp Cost $13,000+
Rockland Engineering Tremec 6 Speed (rated for 900 hp) cost $5,500
E&J Wireworks Custom Electronics and wiring, custom Dash, Gauges and Wiring with custom aluminum dash, analog gauges with tach, speedo, diff temp tranny temp, oil press/2 gas gauges/switch clock, water temp and Air/Fuel, race start ignition and more, . cost $4,500
Custom Made headers, wrapped and tune to motor.
1995 E36 M3 race prepped body $15,000
Body stripped to bare metal and lightened and professionally reinforced
MA SHAW Wide Body Kit professionally installed $4,400
Fiberglass body(quarter panels, doors, bumpers,splitter)
Carbon Fiber Hood-PTG style
Carbon Fiber roof insert
Carbon Fiber Trunk
Carbon front winglets
Carbon Fiber PTG Adjustable rear wing
Glass front and rear windows and Lexan rear sides
BMW Race Red Paint exterior, interior-$2,500
Two Imola Seats-Carbon Kevlar with new black covers with race sliders $2,250
Moton Shocks and Eibach Springs(extra springs) $5,000
Aluminum /Delrin Diff Mounts
Solid Motor and Transmission Mount kit.
Quick Release Steering Wheel Hub
Offset Control Arm Bushings
solid Rear Subframe Bushings
Racing Trailing Arm Bushing kit
Upper Monoball Subframe/control arm bushings
Ground Control Solid Aluminum Shock Tower mounts
Reinforced subrame and shock mounts
ATL and custom install/wiring $1,500
Two fuel systems, split tank and rear ATL
6 Piston Front/4 Piston Rear $2,500
Custom Front-Rear Bias and Master Cylinder $1,250
Custom, Full Body Roll cage, to all shock points, side impact protection, roll over protection-Legal in all series. $4,500
Fire Suppression system with 5 nozzles.
5 pt. Race Harnesses
Race Comm setup
Complete Custom Wheel Two Sets
Continental Race Tires
Toyo R888 for rains
Over $100,000 Invested. Sell complete car for $57,000/offer sell roller for $42,000 and motor for $10,000 if interested.
Also have 2017 custom Top of the line Aluma Trailer with custom storage, tire rack, winch, air compressor on gel batteries and large inverter. No generator needed all runs on battery. $10,000 invested, sell for $6500
Tow vehicle for sales is a 2004 Ford F250 diesel in perfect shape with many extras setup for towing.