I am selling my E36 chassis BMW race car. This was built and campaigned in SCCA and NASA ITS for several years, then converted to NASA / USTCC Touring Car for a couple years. Could be classed several places depending on whether you want to run it as is, or detune for other classes.
Chassis is a 1995 325i sedan. This was stripped and built the right way. All the chassis re-enforcements that needed done on the E36 were done. Every part replaced with top level race parts, and painstaking hours poured into it. Has SCCA and NASA log books.
Cage was custom built TIG welded. Seat is a new never used Halo seat. I have well over 55K into this over the last 10 years. My loss is your gain :)
Full photo gallery is here: https://1drv.ms/f/s!AvHUx4D30wnJioh2hw0UhkramIOFYQ
I forgot to put the front bumper skin in place for the pics. took it off for loading / unloading. have spares for most all body panels as well. (list below)
Some of the pics in the gallery are from early build pics. the pics with the black hood/roof/trunk are car as is. As mentioned, i just forgot to put front bumper back on for pictures. looks similar to the one in the pics. You will see various dents etc on the car. its not perfect, but its very solid mechanically and where it counts. The dents are actually from transporting it,... not from on track contact. It had a rough ride one trip and got many of the panels dented up a bit. chassis etc all solid, straight, and strong.
Engine: 2.8 L M52, 235Hp 7000 RPM Inline 6 Cylinder (s50 cams, chip, m50 intake, kromerkraft headers and complete KK oval exhaust)
Driveline: Getrag 5sp mated to clutchnet lightened flywheel and racing clutch, 3.73/3.38 Diffsonline 60% lock limited slip differential ($2K)
Suspension: Advance Design double adjustable shocks, Ground Control springs, Adj Camber plates & Sway Bars
2 sets – Wheels 17X8 Team Dynamics Pro Aluminum Race Wheels. Also probably 1-2 sets of 15″ wheels. (would need to put stock calipers back on though)
Brakes Stop Tech 4 piston ST40 Calipers, 2 piece 332mmX32mm floating directional rotors and floating hats
Solid mounts throughout car, trans, differential etc
SPARE 328i engine, rear subframe, differential(s), transmission, all 4 doors, front fenders, front bumper. I am pretty sure there are at least a set of extra race pads as well. various other spares.
Only thing you would need to go racing is a new firebottle (there is one included.. just needs updated), and updated harnesses. the ones in it are brand new and never used but i am sure they are expired. Also, one set of tires are brand new hankook but are aged. would be fine i am sure for track days, but i am sure they have hardened with age. Other set is just old used race tires. Then just regular setup/alignment.
Also needs rear window glass. Last tow some tires came loose and fell onto rear window breaking it.