I am a Mechanical Engineer who has been building Manual Transmissions since 1980 as a sideline. I specialize in Muncie, Borg Warner, and Ford Toploader Transmissions Above Added: Fri February 16, 2018, 5:42 pm EST
1965 Borg Warner T-10 Transmission original equipment on 289 2V Mustangs. Completely rebuilt using top quality parts (new SKF Max-Load Bearings, new Brass Synchros, new seals, gaskets, and tailshaft bushing) from the Gearbox, an eBay seller. 10-spline input shaft, 28-spline output. No cracks or breaks in mounts, threads in good shape for shifter mount, and for shifter linkage. All hard parts are original Borg Warner except the countershaft pin which was purchased from The Gearbox with the rebuild kit. Side cover is loose for inspection, bolts are included.Additional photos available on request.