Designed to eliminate all of the issues found with other so-called “Universal Transmission Tunnels” the Ultimate Carbon Fiber Transmission Tunnel Kit provides a truly universal fit, flawless carbon fiber finish and all of the hardware necessary for a clean and professional installation.
A true one-sized fits all approach delivers no boundaries allowing for ultimate customization. That is why the TMC-1304K is comprised of skillfully molded panels which are generously sized for even the largest interior spaces. This allows you to trim each piece as needed for a factory-like fit in your race car.
Installing the Ultimate Carbon Fiber Transmission Tunnel Kit is easier than ever with a detailed set of step-by-step instructions and diagrams. Two midplate panels seal against your firewall and extend rearward covering the transmission to meet another set of overlapping panels that span the length of your vehicle. A set of molded floor panels connect to the main tunnel providing a smooth finish.
If you ever had the misfortune of working with other “Universal Transmission Tunnels” you have discovered that no consideration has been given to how the tunnel will connect to the chassis at its rear or where you can run shifter linkage for an automatic transmission.
To resolve these issues, the Ultimate Carbon Fiber Tunnel Kit provides you with another carbon fiber panel and angled aluminum strip to create a bulkhead for the rear of the tunnel while completely sealing off the interior. For automatic transmissions, an additional molded panel is included to be used with the driver side midplate panel. This panel features a flange that provides a seamless path for your shifter linkage.
The last thing you need when purchasing a kit is to discover that it only contains half of what you need to get the job done. That is why the Ultimate Carbon Fiber Transmission Tunnel Kit, like other TMPP products, comes with all of the hardware needed for a clean and professional installation.
Whether you are running a single or double frame rail race car with a clutch or automatic transmission, the Ultimate Carbon Fiber Transmission Tunnel Kit is the only solution designed for a true universal fit.
- Detailed Step-By-Step Instructions with Diagrams
- 2 Molded Midplate Panels (Oversized, trim to fit.)
- 2 Molded Tunnel Panels (Oversized, trim to fit.)
- 2 Molded Floor Panels (Oversized, trim to fit.)
- 1 Molded Transmission Linkage Panel (Oversized, trim to fit.)
- 1 Rear Bulkhead Panel (Oversized, trim to fit.)
- 1 Angled Aluminum Strip for Bulkhead Connection
- All Necessary Hardware (Dzus Fasteners, Dzus Tabs, Springs, Rivets, Screws)