44 PLUS Coil for mag 44 (8142 replacement) - $725

Listed By Fuel Injection Enterprises
Contact (541) 990-2485
44 PLUS Coil for mag 44 (8142 replacement)  for Sale $725 44 PLUS Coil for mag 44 (8142 replacement)  for Sale $725 44 PLUS Coil for mag 44 (8142 replacement)  for Sale $725
$725
Business Seller - Fuel Injection Enterprises
Albany, OR
Message Seller
+ Add to Favorites
Report This Ad

Item Details

Ad Number183064728
ConditionNew

Description

We think the world is ready for a hot-rodded, repairable coil for the mag 44.

Introducing, the 44 PLUS! Our own new coil for the mag 44 not only yields MORE output, but is serviceable too. What could be better than more juice for less money in a repairable format?

MORE OUTPUT: The winding inside is our special recipe of copper wire (lots) and (big) laminations. It yields fantastic cranking spark, over 10% more voltage and more than a 10% increase in spark duration than the standard 8142 coil or the old original black version of the mag 44 coil. Voltage is what compels a spark to jump a gap and more voltage means this coil will fire in even more difficult conditions...higher compression ratio, more boost pressure, more fuel. More spark duration means the spark will last longer (more crankshaft degrees) to more thoroughly light your mixture. This coil will NOT work with Super-mags. The winding is specifically formulated for MSD 20 and 44 mags.

SERVICEABLE: Besides being a terrific dielectric medium to isolate every turn of copper wire, the special transformer oil inside also allows us to fix or repair the coil if anything happens to it. If ever needed, we can replace the entire winding, terminals, plastic pieces, etc. so you don't have to buy a new one. No more epoxy filled door stops!

AFFORDABLE: Our coil WITH the billet bracket is less initial cost than a new 8142. The repairable nature serves to enhance your initial investment for years to come.

These coils feature internal bolstering to prevent vibration and shake of the winding inside. We also use #10 stainless steel primary terminals and a brass high-tension output terminal on the bottom. Weight = 8 lbs. Bracket = 1.2 lbs.

Available in either red or black. The price above INCLUDES a new billet aluminum bracket. The bracket comes assembled on your new coil ready to go. You can also use the option below to purchase without the bracket. Each coil comes with terminal nuts and #10 ring terminals for 10-12 GA wire.

After assembly, each coil is load tested and measured for output in-house before packaging.

NOTE: This product is NOT manufactured by MSD, Inc.


MADE IN USA
BUY IT NOW: https://fuelinjectionent.myshopify.com/collections/coils-transformers/products/44-plus-coil-for-mag-44-8142-replacment

Payment Details

TradesNot Accepted
Accepted Payment Methods Paypal, Credit Card

Message Seller

Send Message

About The Seller

BUSINESS SELLER
Fuel Injection Enterprises
Member Since December 2008
CONTACT INFORMATION
1710 NW independence Hwy
Albany, OR 97321
(541) 990-2485
(541) 990-2485
BUSINESS WEBSITE
fuelinjectionent.com/
Get Transportation Rates

Location

ALBANY,OR
View All Resources

Buyer Resources

Insurance
Shipping

Compare shipping quotes and save up to 80%

This item ships from 97321

More From This Seller

  • 44 PLUS Coil for mag 44 (8142 replacement)

    $725
    ALBANY, OR
  • 44 PLUS Coil for mag 44 (8142 replacement)

    $725
    ALBANY, OR
  • 44 PLUS Coil for mag 44 (8142 replacement)

    $725
    ALBANY, OR
  • SUPERCHARGED EFI Plate System, Old School

    $5,959
    ALBANY, OR
Copyright © 2005-2018 MH Sub I, LLC dba Internet Brands All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy